Premium Information is available for this item - Upgrade for $1 a day
5310-01-253-8437
Flat Washer
5310012538437 012538437 5595667 12340058 EC12340058 5310PL0760600
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
11
Marketplace 5310-01-253-8437
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-253-8437 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-253-8437 (Identification) 2/3 NSN 5310-01-253-8437 (Identification
EC12340058 WASHER,FLAT 2 EA NS Request Quotation Subscribe to View Vendor Details... 12340058 WASHER,
Flat Washer 5310012538437 012538437,12340058 WASHER 3 EA NS Request Quotation 12340058 WASHER https
410-7037 Vehicular Equip Modification Kit 014107037 2510012519995 Insulation Panel,Vehicular 1Ea;5310012538437
BOLT,SHOULDER 3 EA NS Request Quotation Subscribe https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-253-8437
Flat Washer 5310012538437 012538437,12340058 2540-01-410-7037 Vehicular Equip Modification Kit
4Ea;5306013157086 Bolt,Sholder 2Ea;5306013157087 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-253-8437
Flat Washer 5310012538437 012538437,12340058 2510012519995 Insulation Panel,Vehicular 1Ea;5310012538437
Shoulder Bolt 5306013161456013161456 Documents 5306-01-316-1456 1+ Documents ( More... ) https 1Ea;5310012538437
Restrictions 5310-01-253-8437
5310-01-253-8437 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-253-8437
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-253-8437
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AJBDAZ
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Spain (YB01)
- Effective Date:
- 1 May 2006
- Canada (ZC01)
- Effective Date:
- 1 Jul 2011
- Denmark (ZS01)
- Effective Date:
- 1 Nov 2005
- Turkey (ZW01)
- Effective Date:
- 1 Oct 2006
Approved Sources 5310-01-253-8437
- Part Number
- Manufacturer
- Status
- 5595667
- Manufacturer
- 34623 - Am General Llc (Active)
- Primary Buy
- Primary Buy
- 12340058
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- EC12340058
- 34623 - Am General Llc (Active)
- Secondary Buy
- Secondary Buy
- 5310PL0760600
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-01-253-8437
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 40.0 Rockwell C Minimum And 45.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.440 Inches Minimum And 0.450 Inches Maximum
- Material [MATT]
- Steel Comp 1045 Overall Or Steel Comp 1050 Overall Or Steel Comp 1055 Overall Or Steel Comp 1060 Overall Or Steel Comp 1064 Overall Or Steel Comp 1065 Overall Or Steel Comp 1070 Overall Or Steel Comp 1074 Overall Or Steel Comp 1080 Overall
- Overall Diameter [ADAV]
- 1.500 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty2,Cl2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thickness [ABNM]
- 0.115 Inches Minimum And 0.125 Inches Maximum
Weapon Systems (WSDC) 5310-01-253-8437
DLA Procurement Analysis 5310-01-253-8437
- Last Stock Position:
- 15467 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-253-8437
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-253-8437
Freight Information 5310-01-253-8437
5310-01-253-8437 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-253-8437 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-253-8437 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-253-8437 is not classified as a special type of cargo when transported by water. 5310-01-253-8437 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-253-8437
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-253-8437 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: