Premium Information is available for this item - Upgrade for $1 a day
5310-01-231-7465
Flat Washer
5310012317465 012317465 FF-W-92 AN960KD16 NAS1149D1690K AN960KD1616
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by United States
NSN Created on 3 May 1986
Data Last Changed
November 2023
November 2023
NATO Update Count
27
27
NATO Data Quality
Marketplace 5310-01-231-7465
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-231-7465 5+ Documents (More...)
HMIC : | PMIC : | EDC: | ADPEC : 5310-14-231-7465 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-231-7465
Flat Washer 5310012317465 012317465,FF-W-92 on 3 May 1986 Data Last Changed November 2023 NATO
Update Count 27 NATO Data Quality NSN 5310-01-231-7465 (Identification) 1/3 NSN 5310-01-231-7465 (Identification
Flat Washer 5310012317465 012317465,FF-W-92 on 3 May 1986 Data Last Changed November 2023 NATO
Update Count 27 NATO Data Quality NSN 5310-01-231-7465 (Identification) 1/3 NSN 5310-01-231-7465 (Identification
Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-240-1817Flat Washer5310012401817 012401817 FF-W-92
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
5310-00-110-5640 5310001105640 001105640 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
how to enable JavaScript in your web browser . 5310-21-888-1021Flat Washer5310218881021 218881021 FF-W-92
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
5310-00-995-2524 5310009952524 009952524 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5310-01-231-7465
5310-01-231-7465 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-231-7465
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-231-7465
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CT
- US Coast Guard (C918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- C004
- Supplementary Receivers:
- XH
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Columbia (YC01)
- Effective Date:
- 1 Jun 2015
- Singapore (YJ01)
- Effective Date:
- 1 Nov 2007
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Mar 2001
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 Oct 2008
- Denmark (ZS01)
- Effective Date:
- 1 Sep 2014
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-01-231-7465
- Part Number
- Manufacturer
- Status
- NAS1149D1690K
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- FF-W-92
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- AN960KD1616
- 88044 - Aeronautical Standards Group (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AN960KD16
- 88044 - Aeronautical Standards Group (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-231-7465
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 1.005 Inches Minimum And 1.025 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/5,T3 Or T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Nondefinitive Spec/Std Data [ZZZT]
- A Type And 1 Grade And D Class
- Overall Diameter [ADAV]
- 1.745 Inches Minimum And 1.770 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Ty 1 Or Ty 2,Cl 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thickness [ABNM]
- 0.083 Inches Minimum And 0.097 Inches Maximum
Weapon Systems (WSDC) 5310-01-231-7465
DLA Procurement Analysis 5310-01-231-7465
- Last Stock Position:
- 1172 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-231-7465
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- CC
- Other Aircraft Categories
Multi-Application Aviation Spares
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-231-7465
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
Freight Information 5310-01-231-7465
5310-01-231-7465 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-231-7465 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-231-7465 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-231-7465 is not classified as a special type of cargo when transported by water. 5310-01-231-7465 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-231-7465
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-231-7465 25 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A624FA2GC
- 13 Oct 2023
- Subscribe
- 400
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB7PA
- 14 Jul 2023
- Subscribe
- 234
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB7PA
- 14 Jul 2023
- Subscribe
- 234
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F7660
- 17 Feb 2023
- Subscribe
- 164
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F7660
- 17 Feb 2023
- Subscribe
- 164
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F5670
- 13 Jan 2023
- Subscribe
- 240
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F5670
- 13 Jan 2023
- Subscribe
- 240
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F199U
- 22 Jun 2022
- Subscribe
- 1069
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F199U
- 22 Jun 2022
- Subscribe
- 1069
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F116H
- 15 May 2022
- Subscribe
- 313
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F116H
- 15 May 2022
- Subscribe
- 313
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F9634
- 20 Mar 2022
- Subscribe
- 1590
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F9634
- 20 Mar 2022
- Subscribe
- 1590
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F8339
- 17 Feb 2022
- Subscribe
- 99
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F8339
- 17 Feb 2022
- Subscribe
- 99
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F5385
- 17 Dec 2021
- Subscribe
- 246
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F5385
- 17 Dec 2021
- Subscribe
- 246
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F331F
- 15 Jul 2021
- Subscribe
- 766
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F331F
- 15 Jul 2021
- Subscribe
- 766
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F3416
- 09 Dec 2018
- Subscribe
- 3330
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F3229
- 27 Nov 2018
- Subscribe
- 2908
- Subscribe
- Subscribe
- Subscribe
- SPE5EN18F0988
- 29 Dec 2017
- Subscribe
- 1858
- Subscribe
- Subscribe
- Subscribe
- SPM5EY13D05540384
- 23 Jul 2017
- Subscribe
- 1608
- Subscribe
- Subscribe
- Subscribe
- SPE5E815V5331
- 16 May 2015
- Subscribe
- 12389
- Subscribe
- Subscribe
- Subscribe
- SPE5E814V3451
- 12 Mar 2014
- Subscribe
- 3753
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-231-7465 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: