Premium Information is available for this item - Upgrade for $1 a day
5310-01-230-2349
Flat Washer
5310012302349 012302349 25896R1
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
9
Marketplace 5310-01-230-2349
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-230-2349 5+ Documents (More...)
Flat Washer 5310012302349 012302349,25896R1 5310-01-230-2349 5310012302349 012302349 is a washer
Flat Washer 5310012302349 012302349,25896R1 5310-01-230-2349 5310012302349 012302349 is a washer
Flat Washer 5310012302349 012302349,25896R1 5310-01-230-2349 5310012302349 012302349 is a washer
NumberManufacturerStatus25896R1 29510 - Komatsu American Intl Co (Replaced) Original Design RNCC 3 RNVC 9 DAC 5 25896R1
Restrictions 5310-01-230-2349
5310-01-230-2349 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-230-2349
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-230-2349
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2008
- US Marine Corps (MC47)
- Effective Date:
- 1 Oct 2007
Approved Sources 5310-01-230-2349
- Part Number
- Manufacturer
- Status
- 25896R1
- Manufacturer
- 03KT1 - Anixter (Active)
- Primary Buy
- Primary Buy
- 25896R1
- 89346 - Navistar Intl Corp Truck Br Ohio (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 25896R1
- 338X5 - Navistar Defense Llc (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5310-01-230-2349
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- End Item Identification [AGAV]
- Mrap - Unique Nsn - Maxxpro Cat I
- Part Name Assigned By Controlling Agency [CXCY]
- Washer,Lock .406X.812X.089 Phc
Weapon Systems (WSDC) 5310-01-230-2349
DLA Procurement Analysis 5310-01-230-2349
- Last Stock Position:
- 600 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-230-2349
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- BG
- Subscribe
- 1
- BG
- Oct 2021
- Department of the Army (DA)
- BG
- Subscribe
- 1
- BG
- Jul 2021
- Department of the Air Force (DF)
- BG
- Subscribe
- 1
- BG
- Oct 2020
- US Marine Corps (DM)
- BG
- Subscribe
- 1
- BG
- Apr 2020
- US Marine Corps (DM)
- BG
- Subscribe
- 1
- BG
- Jan 2020
- Department of the Air Force (DF)
- BG
- Subscribe
- 1
- BG
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Army (DA)
- A
- K
- U/I Contains 50 Ea
- 00000000050EA
- K
- Department of the Air Force (DF)
- F
- K
- U/I Contains 50 Ea
- 00000000050EA
- K
- US Marine Corps (DM)
- M
- 4
- Reversal Of Phrase Code A 5310-01-556-5400
- 4
- US Marine Corps (DM)
- M
- K
- U/I Contains 50 Ea
- 00000000050EA
- K
- Defense Logistics Agency (DS)
- I
- K
- U/I Contains 50 Ea
- 00000000050EA
- K
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-01-230-2349
Freight Information 5310-01-230-2349
5310-01-230-2349 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-230-2349 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-230-2349 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-230-2349 is not classified as a special type of cargo when transported by water. 5310-01-230-2349 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-230-2349
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-230-2349 August 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: