Premium Information is available for this item - Upgrade for $1 a day
5310-01-204-1367
Flat Washer
5310012041367 012041367 BACW10BP10APU
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
11
Marketplace 5310-01-204-1367
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-204-1367 2+ Documents (More...)
BACW10BP10APU WASHER 25 EA NS Request Quotation BACW10BP10APU WASHER 21 EA NS Request Quotation Subscribe
BACW10BP10APU WASHER,FLAT 54 EA NS Request Quotation Updated Every Day 5310-01-204-1367 RQST NE Updated
Day 5310-01-669-7018 RQST NE Related Documents https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-204-1367
Flat Washer 5310012041367 012041367 BACW10BP10APU WASHER,FLAT 15 EA NS Request Quotation Subscribe
Restrictions 5310-01-204-1367
5310-01-204-1367 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-204-1367
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-204-1367
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- Singapore (YJ01)
- Effective Date:
- 1 Feb 2005
- Australia (ZA01)
- Effective Date:
- 1 Jul 2009
- New Zealand (ZE01)
- Effective Date:
- 1 May 2003
- Republic of Korea (ZH01)
- Effective Date:
- 1 Dec 2011
Approved Sources 5310-01-204-1367
- Part Number
- Manufacturer
- Status
- BACW10BP10APU
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACW10BP10APU
- Z03F0 - Boeing Defence Australia Ltd (Active)
- Secondary Buy
- Secondary Buy
- BACW10BP10APU
- Z8T75 - Boeing Defence Australia Ltd (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-204-1367
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.625 Inches Minimum And 0.636 Inches Maximum
- Material [MATT]
- Iron Alloy 660 Overall
- Material Document And Classification [MDCL]
- Ams 5525 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.050 Inches Minimum And 1.070 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thickness [ABNM]
- 0.073 Inches Minimum And 0.087 Inches Maximum
Weapon Systems (WSDC) 5310-01-204-1367
DLA Procurement Analysis 5310-01-204-1367
- Last Stock Position:
- 1308 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-204-1367
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FL
- C-135 STRATOLIFTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-204-1367
Freight Information 5310-01-204-1367
5310-01-204-1367 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-204-1367 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5310-01-204-1367 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-204-1367 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5310-01-204-1367 is not classified as a special type of cargo when transported by water. 5310-01-204-1367 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-204-1367
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-204-1367 9 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A224F0177
- 13 Oct 2023
- Subscribe
- 187
- Subscribe
- Subscribe
- Subscribe
- SPE4A223F7763
- 20 Aug 2023
- Subscribe
- 1090
- Subscribe
- Subscribe
- Subscribe
- SPE4A223F7763
- 20 Aug 2023
- Subscribe
- 1090
- Subscribe
- Subscribe
- Subscribe
- SPE4A223F6908
- 14 Jul 2023
- Subscribe
- 843
- Subscribe
- Subscribe
- Subscribe
- SPE4A223F6908
- 14 Jul 2023
- Subscribe
- 843
- Subscribe
- Subscribe
- Subscribe
- SPE5E819V0982
- 02 Nov 2018
- Subscribe
- 4000
- Subscribe
- Subscribe
- Subscribe
- SPE5E818V6128
- 08 May 2018
- Subscribe
- 5223
- Subscribe
- Subscribe
- Subscribe
- SPE5E816V6866
- 09 Aug 2016
- Subscribe
- 4418
- Subscribe
- Subscribe
- Subscribe
- SPM54006DBP024406
- 28 May 2015
- Subscribe
- 1725
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-204-1367 April 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: