Premium Information is available for this item - Upgrade for $1 a day
5310-01-200-1448
Recessed Washer
5310012001448 012001448 140-007-17-17C3
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED. View more Recessed Washer
November 2023
2
Marketplace 5310-01-200-1448
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-200-1448 1+ Documents (More...)
Recessed Washer 5310012001448 012001448 5310-01-200-1448 5310012001448 012001448 is a washer of
Restrictions 5310-01-200-1448
5310-01-200-1448 is a Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-200-1448
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-200-1448
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CT
Approved Sources 5310-01-200-1448
- Part Number
- Manufacturer
- Status
- 140-007-17-17C3
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-200-1448
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Bottom Recess Angle [CRKG]
- 90.0 Degrees Nominal
- Bottom Recess Diameter [CSML]
- 0.342 Inches Minimum And 0.345 Inches Maximum
- Hole Diameter [AAUB]
- 0.265 Inches Minimum And 0.272 Inches Maximum
- Material Thickness [ABPX]
- 0.089 Inches Minimum And 0.099 Inches Maximum
- Material [MATT]
- Steel Comp H11 Overall
- Minimum Tensile Strength [CQBC]
- 240000 Pounds Per Square Inch
- Outside Diameter [ABKV]
- 0.521 Inches Minimum And 0.541 Inches Maximum
- Material Document And Classification [MDCL]
- Ams6485 Assn Std Single Material Response Overall Or Ams 6487 Assn Std Single Material Response Overall
- Top Recess Angle [CRSD]
- 90.0 Degrees Nominal
- Top Recess Diameter [CQJW]
- 0.342 Inches Minimum And 0.345 Inches Maximum
- Style Designator [STYL]
- Recessed Both Sides
- Surface Finish [CSYM]
- 63.0 Microinches Top
- Surface Finish [CSYM]
- 63.0 Microinches Bottom
- Surface Treatment Document And Classification [STDC]
- Mil-C-8837,Ty 2,Cl 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
Weapon Systems (WSDC) 5310-01-200-1448
DLA Procurement Analysis 5310-01-200-1448
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-200-1448
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- BX
- Rotary Wing Aircraft
OH-58D Army Helicopter Improvement Program (AHIP)
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5310-01-200-1448
Freight Information 5310-01-200-1448
5310-01-200-1448 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-200-1448 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-200-1448 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-200-1448 is not classified as a special type of cargo when transported by water. 5310-01-200-1448 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-200-1448
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-200-1448 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: