Premium Information is available for this item - Upgrade for $1 a day
5310-01-199-1354
Flat Washer
5310011991354 011991354 FF-W-92 NAS1149D0563K 907896 AN960KD516 5310PL0794123 5310PL0787220
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by United States
NSN Created on 17 Jan 1985
Data Last Changed
November 2023
November 2023
NATO Update Count
41
41
NATO Data Quality
Marketplace 5310-01-199-1354
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-199-1354 5+ Documents (More...)
FF-W-92 NAS1149D0563K 907896 AN960KD516 5310PL0794123 5310PL0787220 A washer having a centrally located
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
NAS1149D0563K WASHER,FLAT 100 EA NS Request Quotation AN960KD516 WASHER,FLAT 100 EA NS Request Quotation
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
NAS1149D0563K WASHER,FLAT 100 EA NS Request Quotation AN960KD516 WASHER,FLAT 100 EA NS Request Quotation
NAS1149D0563K WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
AN960KD516 WASHER,FLAT 816 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
AN960KD516 WASHER,FLAT 816 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
AN960KD516 WASHER,FLAT 4 HD NS Request Quotation AN960KD516L WASHER,FLAT 50 HD NS Request Quotation FF-W
Flat Washer 5310011991354 011991354,FF-W-92 AN960KD516 WASHER 495 EA NS Request Quotation Subscribe
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
Flat Washer 5310011991354 011991354,FF-W-92 AN960KD516 WASHER 495 EA NS Request Quotation Subscribe
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation AN960KD516 WASHER,FLAT 4 EA NS Request Quotation Subscribe
for $1 a day Upgrade your Account Upgrade 1560-00-806-6284Knee Switch Shield1560008066284 008066284 907896
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 907896
-1 SHIELD,KNEE SWITCH 16 EA NS Request Quotation Subscribe to View Vendor Details... 907896-1 SHIELD,
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 907896
-1 SHIELD,KNEE SWITCH 16 EA NS Request Quotation Subscribe to View Vendor Details... 907896-1 SHIELD,
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-345-6557 Flat Washer 5310013456557 013456557,FF-W-92 FF-W-92 WASHER,FLAT
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-345-6557 Flat Washer 5310013456557 013456557,FF-W-92 FF-W-92 WASHER,FLAT
Restrictions 5310-01-199-1354
5310-01-199-1354 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-199-1354
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-199-1354
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BDCT
- US Coast Guard (C918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- C004
- Supplementary Receivers:
- XH
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 May 2007
- Czech Republic (WZ01)
- Effective Date:
- 1 Feb 2010
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Columbia (YC01)
- Effective Date:
- 1 Jun 2015
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Aug 1997
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Nov 1994
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Feb 1999
- France (ZF01)
- Effective Date:
- 1 May 2015
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 May 1998
- Netherlands (ZN01)
- Effective Date:
- 1 Dec 1995
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Denmark (ZS01)
- Effective Date:
- 1 Nov 2004
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Nov 2008
Approved Sources 5310-01-199-1354
- Part Number
- Manufacturer
- Status
- NAS1149D0563K
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- FF-W-92
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- NAS1149D0563K
- A0126 - Leonardo Spa Helicopters Division - (Active)
- Secondary Buy
- Secondary Buy
- 907896
- A274N - Scandinavian Manufacturing Scama Ab (Active)
- Secondary Buy
- Secondary Buy
- AN960KD516
- 88044 - Aeronautical Standards Group (Active)
- Secondary Buy
- Secondary Buy
- 5310PL0794123
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
- 5310PL0787220
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-01-199-1354
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.318 Inches Minimum And 0.338 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/5,T3 Or T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Nondefinitive Spec/Std Data [ZZZT]
- A Type And 2 Grade And D Class
- Overall Diameter [ADAV]
- 0.557 Inches Minimum And 0.582 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thickness [ABNM]
- 0.057 Inches Minimum And 0.069 Inches Maximum
Weapon Systems (WSDC) 5310-01-199-1354
DLA Procurement Analysis 5310-01-199-1354
- Last Stock Position:
- 77452 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-199-1354
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- Nov 2019
- Department of the Army (DA)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- F
- R
- Refer To Approved For Faa Use
- APPROVED FOR FAA USE
- R
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- BJ
- Rotary Wing Aircraft
AH-64 Airframe
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-199-1354
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
Freight Information 5310-01-199-1354
5310-01-199-1354 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-199-1354 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-199-1354 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-199-1354 is not classified as a special type of cargo when transported by water. 5310-01-199-1354 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-199-1354
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-199-1354 43 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A624FA2KE
- 13 Oct 2023
- Subscribe
- 2344
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FBCVD
- 20 Aug 2023
- Subscribe
- 2915
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FBCVD
- 20 Aug 2023
- Subscribe
- 2915
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB7RD
- 14 Jul 2023
- Subscribe
- 965
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB7RD
- 14 Jul 2023
- Subscribe
- 965
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F143G
- 19 May 2023
- Subscribe
- 2175
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F143G
- 19 May 2023
- Subscribe
- 2175
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F061R
- 14 Apr 2023
- Subscribe
- 13089
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F061R
- 14 Apr 2023
- Subscribe
- 13089
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001T
- 17 Mar 2023
- Subscribe
- 10
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001V
- 17 Mar 2023
- Subscribe
- 13604
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001U
- 17 Mar 2023
- Subscribe
- 11
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001V
- 17 Mar 2023
- Subscribe
- 13604
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001U
- 17 Mar 2023
- Subscribe
- 11
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F001T
- 17 Mar 2023
- Subscribe
- 10
- Subscribe
- Subscribe
- Subscribe
- SPRPA123P0265
- 07 Mar 2023
- Subscribe
- 80
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F8081
- 17 Feb 2023
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F8082
- 17 Feb 2023
- Subscribe
- 1203
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F8081
- 17 Feb 2023
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F8082
- 17 Feb 2023
- Subscribe
- 1203
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F6031
- 13 Jan 2023
- Subscribe
- 4460
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F6032
- 13 Jan 2023
- Subscribe
- 18788
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F6031
- 13 Jan 2023
- Subscribe
- 4460
- Subscribe
- Subscribe
- Subscribe
- SPE4A623F6032
- 13 Jan 2023
- Subscribe
- 18788
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4023
- 18 Nov 2021
- Subscribe
- 1512
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4025
- 18 Nov 2021
- Subscribe
- 5036
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4024
- 18 Nov 2021
- Subscribe
- 2618
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4023
- 18 Nov 2021
- Subscribe
- 1512
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4024
- 18 Nov 2021
- Subscribe
- 2618
- Subscribe
- Subscribe
- Subscribe
- SPE4A622F4025
- 18 Nov 2021
- Subscribe
- 5036
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046N
- 09 Apr 2021
- Subscribe
- 4388
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046P
- 09 Apr 2021
- Subscribe
- 5196
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046M
- 09 Apr 2021
- Subscribe
- 505
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046Q
- 09 Apr 2021
- Subscribe
- 12514
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046M
- 09 Apr 2021
- Subscribe
- 505
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046N
- 09 Apr 2021
- Subscribe
- 4388
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046P
- 09 Apr 2021
- Subscribe
- 5196
- Subscribe
- Subscribe
- Subscribe
- SPE4A621F046Q
- 09 Apr 2021
- Subscribe
- 12514
- Subscribe
- Subscribe
- Subscribe
- SPE5E318V5633
- 18 May 2018
- Subscribe
- 19730
- Subscribe
- Subscribe
- Subscribe
- SPE5E416VA233
- 19 Aug 2016
- Subscribe
- 18084
- Subscribe
- Subscribe
- Subscribe
- SPE5E816M3349P00001
- 02 May 2016
- Subscribe
- 12951
- Subscribe
- Subscribe
- Subscribe
- SPE5E814V6227
- 06 Jun 2014
- Subscribe
- 5288
- Subscribe
- Subscribe
- Subscribe
- SPM5E813V2790
- 23 May 2013
- Subscribe
- 1960
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-199-1354 April 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: