Premium Information is available for this item - Upgrade for $1 a day
5310-01-183-4047
Flat Washer
5310011834047 011834047 FF-W-92 AN960KD11
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
7
Marketplace 5310-01-183-4047
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-183-4047 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-183-4047 (Identification) 2/3 NSN 5310-01-183-4047 (Identification
FF-W-92 WASHER,FLAT 34 EA NS Request Quotation Updated Every Day 5310-01-183-4047 RQST NE Updated Every
FF-W-92 WASHER,FLAT 10 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
Flat Washer 5310011834047 011834047,FF-W-92 FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
Flat Washer 5310011834047 011834047,FF-W-92 FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe
Restrictions 5310-01-183-4047
5310-01-183-4047 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-183-4047
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-183-4047
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Feb 1997
- Italy (ZR01)
- Effective Date:
- 1 Dec 2014
Approved Sources 5310-01-183-4047
- Part Number
- Manufacturer
- Status
- AN960KD11
- Manufacturer
- 88044 - Aeronautical Standards Group (Active)
- Definitive Standard
- Definitive Standard
- FF-W-92
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-01-183-4047
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.224 Inches Minimum And 0.244 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/4,Temper T3 Fed Spec Single Material Response Overall Or Qq-A-250/4,Temper T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Nondefinitive Spec/Std Data [ZZZT]
- A Type And 1 Grade And D Class
- Overall Diameter [ADAV]
- 0.620 Inches Minimum And 0.645 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thickness [ABNM]
- 0.065 Inches Nominal
Similar Supply Items to 5310-01-183-4047
Freight Information 5310-01-183-4047
5310-01-183-4047 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-183-4047 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-183-4047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-183-4047 is not classified as a special type of cargo when transported by water. 5310-01-183-4047 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-183-4047
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box