Premium Information is available for this item - Upgrade for $1 a day
5310-01-155-4373
Round Self-Locking Nut
5310011554373 011554373 S-20255 11745836
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY. View more Round Self-Locking Nut
November 2023
11
Marketplace 5310-01-155-4373
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-155-4373 2+ Documents (More...)
Restrictions 5310-01-155-4373
5310-01-155-4373 is a Round Self-Locking Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-155-4373
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-155-4373
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBF
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Jun 1998
- Morocco (YP01)
- Effective Date:
- 1 Jul 2009
- Greece (ZU01)
- Effective Date:
- 1 May 2006
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-01-155-4373
- Part Number
- Manufacturer
- Status
- S-20255
- Manufacturer
- 26233 - Nylok Corporation (Active)
- Primary Buy
- Primary Buy
- 11745836
- 0178B - Indra Sistemas, Sociedad Anonima (Active)
- Secondary Buy
- Secondary Buy
- 5310011554373
- A00AM - E.C.A Etablissement Central Des (Active)
- NATO Reference
- NATO Reference
- 11745836
- 19200 - Combat Capabilities Development (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5310-01-155-4373
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Drive Point Depth [ABQU]
- 0.094 Inches Nominal
- Drive Point Quantity [ADBM]
- 4
- Drive Point Width [ADBH]
- 0.188 Inches Nominal
- Countersink Angle [CRSQ]
- 90.0 Degrees Minimum Both Ends And 120.0 Degrees Maximum Both Ends
- Hardness Rating [CQFM]
- 66.0 Rockwell B Minimum And 92.0 Rockwell B Maximum
- Material [MATT]
- Plastic Polyamide Locking Insert
- Material [MATT]
- Steel Comp 1015 Nut Or Steel Comp 1016 Nut Or Steel Comp 1017 Nut Or Steel Comp 1018 Nut Or Steel Comp 1019 Nut Or Steel Comp 1020 Nut Or Steel Comp 1021 Nut Or Steel Comp 1022 Nut Or Steel Comp 1023 Nut Or Steel Comp 1025 Nut Or Steel Comp 1026 Nut Or Steel Comp 1029 Nut Or Steel Comp 1030 Nut Or Steel Comp 1031 Nut Or Steel Comp 1033 Nut Or Steel Comp 1034 Nut Or Steel Comp 1035 Nut Or Steel Comp 1116 Nut Or Steel Comp 1117 Nut Or Steel Comp 1118 Nut Or Steel Comp 1212 Nut Or Steel Comp 1213 Nut Or Steel Comp 1215 Nut
- Nominal Thread Size [CQJX]
- 1.376 Inches
- Nut Diameter [ACTD]
- 2.057 Inches Nominal
- Nut Style [ACTA]
- Round
- Nut Thickness [ADBG]
- 0.438 Inches Nominal
- Locking Feature [AAUM]
- Prevailing Torque With Nonmetallic Insert
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 2 Fed Spec 1St Treatment Response Nut Or Qq-P-35 Fed Spec 2Nd Treatment Response Nut
- Surface Treatment [SFTT]
- Cadmium Nut And Chromate Nut Or Passivate Nut
- Temp Rating [AZKQ]
- -60.0 Deg Fahrenheit Minimum And 250.0 Deg Fahrenheit Maximum
- Thread Direction [AAJF]
- Right-Hand
- Thread Pitch Diameters [AAJE]
- +1.3399/+1.3439 Inches
- Thread Series [BZRR]
- Uns
- Thread Quantity Per Inch [CMLP]
- 18
Weapon Systems (WSDC) 5310-01-155-4373
DLA Procurement Analysis 5310-01-155-4373
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-155-4373
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-155-4373
Freight Information 5310-01-155-4373
5310-01-155-4373 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-155-4373 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-155-4373 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-155-4373 is not classified as a special type of cargo when transported by water. 5310-01-155-4373 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-155-4373
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-155-4373 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: