Premium Information is available for this item - Upgrade for $1 a day
5310-01-151-0102
Flat Washer
5310011510102 011510102 337-9712 13142983-7/26
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
5
Marketplace 5310-01-151-0102
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-151-0102 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-151-0102 RQST NE Updated Every Day 5310-01-151-0102 RQST
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-151-0102 Flat Washer 5310011510102 011510102,337
-9712 Flat Washer 5310011510102 011510102,337-9712 Day 5935-01-337-9712 RQST NE /fsg-38/fsc-3830/us 3830
-3830/us 3830-00-337-9712 3830003379712003379712 www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-151-0102
-5310/us 5310-01-151-0102 Flat Washer 5310011510102 011510102,337-9712 Documents 5310-01-151-0102 4+
Purpose Cable Assembly RQST Updated Every Day 6150-12-337-9712 RQST NE Related Documents 6150-12-337-
RQST Updated Every Day 5826-14-337-9712 RQST NE Related Documents 5826-14-337-9712 2+ Documents ( More
RQST Updated Every Day 5826-14-337-9712 RQST NE Restrictions 5826-14-337-9712 DEMIL: | DEMILI : | CRITICALITY
MIL-C-3899926 CONNECTOR,PLUG,ELECTRICAL 1 EA NS Request Quotation Updated Every Day 5935-01-337-9712
RQST NE Updated Every Day 5935-01-337-9712 RQST Updated Every Day 5935-01-337-9712 RQST NE Related Documents
Restrictions 5310-01-151-0102
5310-01-151-0102 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-151-0102
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
Approved Sources 5310-01-151-0102
- Part Number
- Manufacturer
- Status
- 337-9712
- Manufacturer
- 62445 - Deutz Corporation (Active)
- Primary Buy
- Primary Buy
- 13142983-7/26
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 5310-01-151-0102
Management Data 5310-01-151-0102
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-01-151-0102
Freight Information 5310-01-151-0102
5310-01-151-0102 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-151-0102 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5310-01-151-0102 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-151-0102 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-151-0102 is not classified as a special type of cargo when transported by water. 5310-01-151-0102 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-151-0102
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-151-0102 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: