Premium Information is available for this item - Upgrade for $1 a day
5310-01-118-2482
Sleeve Nut
5310011182482 011182482 2793569-101 10109320
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
8
Marketplace 5310-01-118-2482
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-118-2482 2+ Documents (More...)
(Identification) 1/2 NSN 5310-01-118-2482 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 5310-01-118-2482 RQST Updated Every Day 5310-01-118-2482 RQST NE Related Documents
6020/us 6020-01-573-1739 Assembly 6020015682127 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-118-2482
Sleeve Nut 5310011182482 011182482 Day 5310-01-118-2482 RQST NE Related Documents https//www.nsnlookup.com
Restrictions 5310-01-118-2482
5310-01-118-2482 is a Sleeve Nut that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-118-2482
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-118-2482
- National Security Agency (DGX1)
- Effective Date:
- 1 Jan 2014
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HDKEHX
- Finland (WF01)
- Effective Date:
- 1 Apr 2011
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-118-2482
- Part Number
- Manufacturer
- Status
- 2793569-101
- Manufacturer
- 92003 - Parker Hannifin Corporation Div (Active)
- Primary Buy
- Primary Buy
- 10109320
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-01-118-2482
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Drilled Hole Diameter [AGGP]
- 0.187 Inches Minimum And 0.193 Inches Maximum
- Cross-Sectional Shape [ANLR]
- Round Nut
- Hole Configuration Style [CRHC]
- Configuration J
- Hole Type And Quantity [ALET]
- 2 Drilled
- Material Document And Classification [MDCL]
- Qq-A-225/8,Temper T651 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 6061 Overall
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Nut Diameter [ACTD]
- 0.875 Inches Minimum And 0.880 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.655 Inches Minimum And 0.665 Inches Maximum
- Special Features [FEAT]
- 2 Holes Spaced 180 Degrees Apart 0.101 In. Min And 0.107 In. Max Diameter And 0.050 In. Min And 0.054 In. Max Deep,Slot Across Face 0.060 In. Wide And 0.015 In. Min And 0.025 In. Max Deep
- Surface Treatment Document And Classification [STDC]
- Ps 13201,Ty 2,Fscm 76301 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unf
- Thread Quantity Per Inch [CMLP]
- 28
DLA Procurement Analysis 5310-01-118-2482
Management Data 5310-01-118-2482
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-118-2482
Freight Information 5310-01-118-2482
5310-01-118-2482 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-01-118-2482 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-01-118-2482 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-118-2482 is not classified as a special type of cargo when transported by water. 5310-01-118-2482 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-118-2482
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-118-2482 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: