Premium Information is available for this item - Upgrade for $1 a day
5310-01-118-0901
Sleeve Nut
5310011180901 011180901 1001505
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
11
Marketplace 5310-01-118-0901
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-118-0901 5+ Documents (More...)
Documents 5310-01-118-0901 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310
Upgrade 5310-01-118-0901Sleeve Nut5310011180901 011180901 United States (US) 4. 5310-01-118-0901 Marketplace
how to enable JavaScript in your web browser . 7830-17-110-3275Halterschijf7830171103275 171103275 1001505
how to enable JavaScript in your web browser . 3460-01-050-9851Drill Chuck3460010509851 010509851 1001505
RQST NE Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505
Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505 RQST NE
Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505 RQST NE
Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505 RQST NE
Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505 RQST NE
RQST NE Request a Quotation from participating marketplace vendors Request Updated Every Day 1001505
Restrictions 5310-01-118-0901
5310-01-118-0901 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-118-0901
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-118-0901
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Poland (WP01)
- Effective Date:
- 1 Mar 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-118-0901
- Part Number
- Manufacturer
- Status
- 1001505
- Manufacturer
- 89305 - Simmonds Precision Products Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-118-0901
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Round Nut
- Material Document And Classification [MDCL]
- Qq-A-225/6 T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Nominal Thread Size [CQJX]
- 0.138 Inches
- Nut Diameter [ACTD]
- 0.500 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.980 Inches Nominal
- Special Features [FEAT]
- Tapped Hole 0.138 In. Dia 0.400 In. Deep On The Opposite End Of Nut
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541 Class 1A Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Chromate Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.400 Inches Nominal
- Thread Series [BZRR]
- Unc
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5310-01-118-0901
DLA Procurement Analysis 5310-01-118-0901
Management Data 5310-01-118-0901
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-118-0901
Freight Information 5310-01-118-0901
5310-01-118-0901 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-01-118-0901 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-01-118-0901 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-118-0901 is not classified as a special type of cargo when transported by water. 5310-01-118-0901 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-118-0901
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-118-0901 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: