Premium Information is available for this item - Upgrade for $1 a day
5310-01-117-4217
Flat Washer
5310011174217 011174217 MIL-STD-130 S8157N460-016 S8157N460-016NA
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
17
Marketplace 5310-01-117-4217
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-117-4217 5+ Documents (More...)
MIL-STD-130 ABSORBER,FIN CAP 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00-845
FITTING,LONGERON 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00-250 MIL-STD-130
SKIN,AIRCRAFT 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00-104-4942 MIL-STD-130
FITTING,LONGERON 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00-250 MIL-STD-130
MIL-STD-130 ABSORBER,FIN CAP 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00
FITTING,LONGERON 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00-250 MIL-STD-130
MIL-STD-130 BELL CRANK 800 EA NS Request Quotation Subscribe to View Vendor Details...
MIL-STD-130 ABSORBER,FIN CAP 800 EA NS Request Quotation FedMall Updated Every 15 Minutes 1560-00
Restrictions 5310-01-117-4217
5310-01-117-4217 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-117-4217
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-117-4217
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HDKE
- Poland (WP01)
- Effective Date:
- 1 Mar 2007
- Spain (YB01)
- Effective Date:
- 1 Sep 2003
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 May 1996
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-01-117-4217
- Part Number
- Manufacturer
- Status
- S8157N460-016
- Manufacturer
- 59364 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- MIL-STD-130
- 96906 - Military Standards (Active)
- Incomplete Standard
- Incomplete Standard
- S8157N460-016NA
- 99193 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S8157N460-016
- 99193 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-117-4217
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.070 Inches Minimum And 0.080 Inches Maximum
- Material [MATT]
- Steel Comp 321 Overall Or Steel Comp 301 Overall Or Steel Comp 302 Overall Or Steel Comp 316 Overall Or Steel Comp 303 Overall
- Overall Diameter [ADAV]
- 0.463 Inches Minimum And 0.468 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.014 Inches Minimum And 0.018 Inches Maximum
Weapon Systems (WSDC) 5310-01-117-4217
DLA Procurement Analysis 5310-01-117-4217
- Last Stock Position:
- 171 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-117-4217
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-117-4217
Freight Information 5310-01-117-4217
5310-01-117-4217 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-117-4217 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-117-4217 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-117-4217 is not classified as a special type of cargo when transported by water. 5310-01-117-4217 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-117-4217
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-117-4217 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: