Premium Information is available for this item - Upgrade for $1 a day
5310-01-108-1080
Shouldered And Recessed Washer
5310011081080 011081080 315C111-1
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers. View more Shouldered And Recessed Washer
May 2023
8
Marketplace 5310-01-108-1080
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-108-1080 2+ Documents (More...)
Restrictions 5310-01-108-1080
5310-01-108-1080 is a Shouldered And Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-108-1080
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-108-1080
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FUKZ
- Poland (WP01)
- Effective Date:
- 1 Mar 2007
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-108-1080
- Part Number
- Manufacturer
- Status
- 315C111-1
- Manufacturer
- 17472 - Eaton Aerospace Llc (Active)
- Primary Buy
- Primary Buy
- 315C111-1
- 72121 - Eaton Motor Site (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-108-1080
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.620 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/6 Fed Spec Single Material Response Overall
- Material Thickness [ABPX]
- 0.250 Inches Nominal
- Material [MATT]
- Aluminum Alloy Overall
- Outside Diameter [ABKV]
- 1.439 Inches Nominal
- Recess Diameter [ABMD]
- 1.112 Inches Nominal
- Recess Angle [CSTM]
- 30.0 Degrees Nominal
- Shoulder Diameter [AAVH]
- 1.280 Inches Nominal
- Shoulder Height [ABMG]
- 0.235 Inches Nominal
- Style Designator [STYL]
- Shouldered And Recessed Both Sides
Weapon Systems (WSDC) 5310-01-108-1080
DLA Procurement Analysis 5310-01-108-1080
Management Data 5310-01-108-1080
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- WF
- F-16 AIR COMBAT FIGHTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-01-108-1080
Freight Information 5310-01-108-1080
5310-01-108-1080 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-108-1080 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5310-01-108-1080 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-108-1080 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5310-01-108-1080 is not classified as a special type of cargo when transported by water. 5310-01-108-1080 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-108-1080
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-108-1080 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: