Premium Information is available for this item - Upgrade for $1 a day
5310-01-098-7245
Flat Washer
5310010987245 010987245 27E12 817-00
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
6
Marketplace 5310-01-098-7245
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-098-7245 5+ Documents (More...)
Flat Washer 5310010987245 010987245,27E12 for $1 a day Upgrade your Account Upgrade 5310-01-098
-7245Flat Washer5310010987245 010987245 27E12 817-00 Vendor Details... 81700 WASHER,FLAT RQST NS Request
Flat Washer 5310010987245 010987245,27E12 5970013615067 013615067 your Account Upgrade 5970-01-
361-5067Plate Insulator5970013615067 013615067 9MJ401817-00 9MJ 401 817-00 9MJ401817-00 INSULATOR,PLATE
1560-14-522-4569 France (ZF) Approved Sources 1560-14-522-4569 Part NumberManufacturerStatusA10-12-817 -00
-2 F0300 - Dassault Aviation (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 A10-12-817-00-2 F2312 - Ste
-2 F2312 - Ste -00-2 F0300 - Dassault Aviation (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 A10-12-817-00
-2 F0300 - Dassault Aviation (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 A10-12-817-00-2 F2312 - Ste
Restrictions 5310-01-098-7245
5310-01-098-7245 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-098-7245
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-098-7245
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 24 Apr 2008
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-098-7245
- Part Number
- Manufacturer
- Status
- 817-00
- Manufacturer
- 92967 - Hutchens Industries Inc (Active)
- Primary Buy
- Primary Buy
- 27E12
- 12603 - Clark Equipment Co (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-098-7245
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 38.0 Rockwell C Minimum And 45.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.805 Inches Minimum And 0.842 Inches Maximum
- Material [MATT]
- Steel Comp 1045 Overall
- Material Document And Classification [MDCL]
- Astm A325 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.462 Inches Minimum And 1.499 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.108 Inches Minimum And 0.160 Inches Maximum
Weapon Systems (WSDC) 5310-01-098-7245
DLA Procurement Analysis 5310-01-098-7245
- Last Stock Position:
- 11869 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-098-7245
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-098-7245
Freight Information 5310-01-098-7245
5310-01-098-7245 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-098-7245 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-098-7245 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-098-7245 is not classified as a special type of cargo when transported by water. 5310-01-098-7245 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-098-7245
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-098-7245 11 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623V350Z
- 27 Jun 2023
- Subscribe
- 4787
- Subscribe
- Subscribe
- Subscribe
- SPE4A622PN549
- 31 May 2022
- Subscribe
- 7437
- Subscribe
- Subscribe
- Subscribe
- SPE5EM21V3176P00001
- 28 Jun 2021
- Subscribe
- 3548
- Subscribe
- Subscribe
- Subscribe
- SPE5E719V0328
- 16 Oct 2018
- Subscribe
- 4118
- Subscribe
- Subscribe
- Subscribe
- SPE5E718V3200
- 09 Apr 2018
- Subscribe
- 2815
- Subscribe
- Subscribe
- Subscribe
- SPE5E718V2443
- 02 Mar 2018
- Subscribe
- 1642
- Subscribe
- Subscribe
- Subscribe
- SPE5E718V1396
- 29 Dec 2017
- Subscribe
- 993
- Subscribe
- Subscribe
- Subscribe
- SPE5E718V0576
- 06 Nov 2017
- Subscribe
- 553
- Subscribe
- Subscribe
- Subscribe
- SPE5E717V5357
- 22 Aug 2017
- Subscribe
- 850
- Subscribe
- Subscribe
- Subscribe
- SPE5E714V3943
- 13 May 2014
- Subscribe
- 9074
- Subscribe
- Subscribe
- Subscribe
- SPE5E713V0111
- 18 Sep 2013
- Subscribe
- 2465
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-098-7245 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: