Premium Information is available for this item - Upgrade for $1 a day
5310-01-089-6045
Sleeve Nut
5310010896045 010896045 3101740-1
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
4
Marketplace 5310-01-089-6045
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-089-6045 1+ Documents (More...)
Updated Every Day 5310-01-089-6045 RQST NE Related Documents 5310-01-089-6045 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-089-6045 Sleeve Nut 5310010896045 010896045,3101740
Restrictions 5310-01-089-6045
5310-01-089-6045 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-089-6045
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-089-6045
- National Security Agency (DGX1)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- DKZ1
- Supplementary Receivers:
- KZ
Approved Sources 5310-01-089-6045
- Part Number
- Manufacturer
- Status
- 3101740-1
- Manufacturer
- 99193 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-089-6045
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Boss Diameter [ADBN]
- 1.058 Inches Minimum And 1.059 Inches Maximum Overall
- Boss Thickness [ADBP]
- 0.220 Inches Minimum And 0.240 Inches Maximum Overall
- Countersink Angle [CRSQ]
- 80.0 Degrees Minimum And 100.0 Degrees Maximum Boss
- Counterbore Diameter [AAWY]
- 0.890 Inches Minimum And 0.900 Inches Maximum Boss
- Cross-Sectional Shape [ANLR]
- Round Boss
- Hardness Rating [CQFM]
- 32.0 Rockwell C Minimum And 48.0 Rockwell C Maximum
- Material [MATT]
- Steel Comp 4340 Overall
- Nominal Thread Size [CQJX]
- 0.875 Inches
- Nut Counterbore Depth [ADFK]
- 0.220 Inches Minimum And 0.240 Inches Maximum Boss
- Nut Diameter [ACTD]
- 1.690 Inches Minimum And 1.710 Inches Maximum
- Nut Length [ACVN]
- 0.430 Inches Minimum And 0.450 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 6415 Assn Std Single Material Response Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unef
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 5310-01-089-6045
Management Data 5310-01-089-6045
NATO Stock Numbers Related to 5310-01-089-6045
Freight Information 5310-01-089-6045
5310-01-089-6045 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-089-6045 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-089-6045 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-089-6045 is not classified as a special type of cargo when transported by water. 5310-01-089-6045 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-089-6045
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-089-6045 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: