Premium Information is available for this item - Upgrade for $1 a day
5310-01-087-2541
Flat Washer
5310010872541 010872541 1406ADX 701-0025-0008 1406
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
June 2023
12
Marketplace 5310-01-087-2541
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-087-2541 3+ Documents (More...)
... 701-0025-0008 WASHER 7360 EA NS Request Quotation Subscribe to View Vendor Details... 1406 WASHER
... 1406 WASHER,FLAT 1 EA NS Request Quotation Updated Every Day 5310-01-087-2541 RQST NE Updated Every
Flat Washer 5310010872541 010872541,1406ADX day Upgrade your Account Upgrade 5310-01-087-2541Flat
Washer5310010872541 010872541 1406ADX 701-0025-0008 Vendor Details... 1406 WASHER,FLAT 8 EA NS Request
Restrictions 5310-01-087-2541
5310-01-087-2541 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-087-2541
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-087-2541
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Belgium (ZB)
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United States of America (ZZ)
Approved Sources 5310-01-087-2541
- Part Number
- Manufacturer
- Status
- 701-0025-0008
- Manufacturer
- 52541 - Beehive Intl (Obsolete)
- Original Design
- Original Design
- 1406ADX
- 1VN02 - Airdale Express Llc (Active)
- Secondary Buy
- Secondary Buy
- 1406
- 73734 - Federal Screw Products Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-087-2541
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.199 Inches Nominal
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 0.375 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Qq-P-416A,Ty1 Fed Spec Single Treatment Response Overall Or Qq-P-416A,Ty2 Fed Spec Single Treatment Response Overall Or Qq-P-35 Fed Spec Single Treatment Response Overall Or Ams 2400C Assn Std Single Treatment Response Overall Or Mil-C-8837,Ty1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall Or Passivate Overall
- Thickness [ABNM]
- 0.030 Inches Nominal
Weapon Systems (WSDC) 5310-01-087-2541
DLA Procurement Analysis 5310-01-087-2541
Management Data 5310-01-087-2541
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5310-01-087-2541
Freight Information 5310-01-087-2541
5310-01-087-2541 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-087-2541 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-087-2541 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-087-2541 is not classified as a special type of cargo when transported by water. 5310-01-087-2541 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-087-2541 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- P
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: