Premium Information is available for this item - Upgrade for $1 a day
5310-01-086-1024
Flat Washer
5310010861024 010861024 T22220
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
4
Marketplace 5310-01-086-1024
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-086-1024 4+ Documents (More...)
Flat Washer 5310010861024010861024,T22220 T22220 A washer having a centrally located hole with a solid
Day 5310-01-086-1024 RQST NE Related Documents 5310-01-086-1024 DEMIL: A | DEMILI : 1 | CRITICALITY
www.nsnlookup.com /fsg-30/fsc-3040/be 3040-13-114-2114 Rigid Connecting Link 3040131142114131142114 T22220
Flat Washer 5310010861024 010861024,T22220 | HMIC : N | PMIC : A | EDC: | ADPEC : 0 5310- https
T22220 BEARING 2 EA NS Request Quotation Subscribe to View Vendor Details...
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-086-1024 Flat Washer 5310010861024 010861024,T22220
www.nsnlookup.com /fsg-30/fsc-3040/be 3040-13-114-1407 Rigid Connecting Link 3040131141407131141407 T22220
www.nsnlookup.com /fsg-30/fsc-3040/be 3040-13-114-1407 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-086-1024
Restrictions 5310-01-086-1024
5310-01-086-1024 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-086-1024
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-086-1024
- Part Number
- Manufacturer
- Status
- T22220
- Manufacturer
- 10988 - Cnh Industrial America Llc (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5310-01-086-1024
Freight Information 5310-01-086-1024
5310-01-086-1024 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-086-1024 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-086-1024 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-086-1024 is not classified as a special type of cargo when transported by water. 5310-01-086-1024 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-086-1024
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --