Premium Information is available for this item - Upgrade for $1 a day
5310-01-084-2510
Flat Washer
5310010842510 010842510 J-2049-52 80054
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
5
Marketplace 5310-01-084-2510
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-084-2510 5+ Documents (More...)
(Identification) 1/3 NSN 5310-01-084-2510 (Identification) 2/3 NSN 5310-01-084-2510 (Identification
BUY NE FedMall Updated Every Day 5310-01-084-2510 RQST NE Updated Every Day 5310-01-084-2510 RQST
to enable JavaScript in your web browser . 4720-99-168-9188Nonmetallic Hose4720991689188 991689188 80054
Nonmetallic Hose 4720991689188991689188 Active) Secondary Buy RNCC 5 RNVC 2 DAC 6 80054 4730-98 -00-
https//www.nsnlookup.com /fsg-61/fsc-6115/us 6115-01-199-0105 Adaptor 6115011990105 011990105,007-80054
98-853-3603 Straight Shaft 2815988533603 988533603,80054 Block 2Ef26930996190073 9961900734822-209-80054
JavaScript in your web browser . 5835-12-129-6018Recorder Subassembly5835121296018 121296018 69810 80054
Straight Shaft 2815988533603 988533603,80054 0073 Part NumberManufacturerStatus4822-209-80054 https
//www.nsnlookup.com /fsg-47/fsc-4730/nz 4730-98-206-7047 Pipe Nipple 4730982067047 982067047,80054 80054
JavaScript in your web browser . 8415-17-124-7728Chin Strap Assembly8415171247728 171247728 633105 80054
Restrictions 5310-01-084-2510
5310-01-084-2510 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-084-2510
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-084-2510
- US Army (A919)
- Effective Date:
- 1 Mar 2014
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
Approved Sources 5310-01-084-2510
- Part Number
- Manufacturer
- Status
- J-2049-52
- Manufacturer
- 76005 - Lord Corporation (Active)
- Primary Buy
- Primary Buy
- 80054
- 29215 - Jenny Products, Inc (Obsolete)
- Primary Buy
- Primary Buy
- 80054
- 16004 - Davey Compressor Co Div Of Keco (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-084-2510
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.557 Inches Minimum And 0.577 Inches Maximum
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 2.380 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.125 Inches Nominal
Weapon Systems (WSDC) 5310-01-084-2510
DLA Procurement Analysis 5310-01-084-2510
- Last Stock Position:
- 13 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-084-2510
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-084-2510
Freight Information 5310-01-084-2510
5310-01-084-2510 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-084-2510 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-084-2510 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-084-2510 is not classified as a special type of cargo when transported by water. 5310-01-084-2510 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-084-2510
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-084-2510 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: