Premium Information is available for this item - Upgrade for $1 a day
5310-01-080-9223
Finishing Washer
5310010809223 010809223 NAS1169C6 NAS1160C6
A washer or cone or disk shape with a centrally located hole, designed to accommodate a flat or oval head screw and provide additional bearing area on the material being fastened. It may or may not have a flush flange feature. View more Finishing Washer
November 2023
10
Marketplace 5310-01-080-9223
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-080-9223 5+ Documents (More...)
Restrictions 5310-01-080-9223
5310-01-080-9223 is a Finishing Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-01-080-9223
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Singapore (YJ01)
- Effective Date:
- 1 Nov 2007
Approved Sources 5310-01-080-9223
- Part Number
- Manufacturer
- Status
- NAS1169C6
- Manufacturer
- 30889 - Eriks Southwest Inc (Active)
- Primary Buy
- Primary Buy
- NAS1169C6
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1169C6
- 60360 - Alvord-Polk, Inc (Active)
- Primary Buy
- Primary Buy
- NAS1169C6
- A0170 - Leonardo Spa Aerostructure Division (Active)
- Secondary Buy
- Secondary Buy
- NAS1169C6
- 86928 - Seastrom Manufacturing Co Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS1169C6
- 25150 - Duplicate Parts Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1160C6
- 04348 - Lawrence Engineering And Supply Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-080-9223
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.140 Inches Minimum And 0.170 Inches Maximum
- Material Thickness [ABPX]
- 0.025 Inches Nominal
- Outside Diameter [ABKV]
- 0.470 Inches Minimum And 0.495 Inches Maximum
- Recess Diameter [ABMD]
- 0.279 Inches Minimum And 0.289 Inches Maximum
- Recess Angle [CSTM]
- 100.0 Degrees Nominal
- Overall Height [ABKW]
- 0.082 Inches Nominal
- Specification/Standard Data [ZZZK]
- 80205-Nas1169 Professional/Industrial Association Standard
- Style Designator [STYL]
- Finishing
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5310-01-080-9223
DLA Procurement Analysis 5310-01-080-9223
- Last Stock Position:
- 400 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-080-9223
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-080-9223
Freight Information 5310-01-080-9223
5310-01-080-9223 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-080-9223 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-080-9223 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-080-9223 is not classified as a special type of cargo when transported by water. 5310-01-080-9223 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-080-9223
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-080-9223 2 Records
Contracting Technical Data File (CTDF) 5310-01-080-9223 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: