Premium Information is available for this item - Upgrade for $1 a day
5310-01-070-8183
Hexagon Plain Nut
5310010708183 010708183 533879
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
November 2023
13
Marketplace 5310-01-070-8183
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-070-8183 5+ Documents (More...)
Updated Every Day 5310-01-070-8183 RQST NE Related Documents 5310-01-070-8183 5+ Documents ( More...
Vendor Details.. https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-070-8183 Hexagon Plain Nut 5310010708183
Vendor Details... 400-533879-24 O-RING 38 EA NS Request Quotation Updated Every Day 5331-01-094-0161
Vendor Details.. https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-070-8183 Hexagon Plain Nut 5310010708183
00-389-0052 Upgrade 5310-01-452-4834Flat Washer5310014524834 014524834 400-533900PC255002391-9400-533879
3040014353020 Assembly3040014353020 014353020 5002391-10 400-533879PC26 400-533900PC26 803-5002391-10 5002391 533879
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 400-533879
fsg-53/fsc-5310/us 5310-01-452-4834 Flat Washer 5310014524834014524834 400-533900PC255002391-9400-533879
Hexagon Plain Nut 5310010708183 010708183 Shouldered Shaft Assembly 3040014353020 Shaft Assembly3040014353020
-533879PC26 400-533900PC26803-5002391-105002391533879 Hexagon Plain Nut 5310010708183010708183 -8 533879
Restrictions 5310-01-070-8183
5310-01-070-8183 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-070-8183
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-070-8183
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5310-01-070-8183
- Part Number
- Manufacturer
- Status
- 533879
- Manufacturer
- 97139 - The Slabe Machine Products Llc (Active)
- Primary Buy
- Primary Buy
- 533879
- J1695 - Kito Mfg Co. Ltd (Active)
- Secondary Buy
- Secondary Buy
- 533879
- 61062 - Comet Mfg Co Inc (Obsolete)
- Secondary Buy
- Secondary Buy
- 533879
- S0254 - Kito Mfg Co. Ltd (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 533879
- 04861 - Cooper Industries Inc Cooper (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 533879
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 533879
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-070-8183
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Drilled Hole Diameter [AGGP]
- 0.045 Inches Minimum And 0.055 Inches Maximum
- Bearing Surface Finish [CSXL]
- 125.0 Microinches
- Bearing Surface Type [CRTM]
- Washer Faced
- Countersink Angle [CRSQ]
- 85.0 Degrees Minimum Nut And 95.0 Degrees Maximum Nut
- Hardness Rating [CQFM]
- 19.0 Rockwell C Minimum And 26.0 Rockwell C Maximum
- Hole Configuration Style [CRHC]
- Configuration B
- Hole Type And Quantity [ALET]
- 2 Drilled
- Material [MATT]
- Steel Comp 8740 Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches
- Nut Height [ADEA]
- 0.146 Inches Minimum And 0.166 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Material Document And Classification [MDCL]
- Ams 6322 Assn Std Single Material Response Overall
- Width Across Flats [ASDB]
- 0.367 Inches Minimum And 0.376 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Ams 2400 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5310-01-070-8183
DLA Procurement Analysis 5310-01-070-8183
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-070-8183
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- RV
- PRATT & WHITNEY JET ENGINES & COMPONENTS TF-33
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5310-01-070-8183
Freight Information 5310-01-070-8183
5310-01-070-8183 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-070-8183 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-070-8183 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-070-8183 is not classified as a special type of cargo when transported by water. 5310-01-070-8183 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-070-8183
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-070-8183 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: