Premium Information is available for this item - Upgrade for $1 a day
5310-01-067-4157
Flat Washer
5310010674157 010674157 100080
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
4
Marketplace 5310-01-067-4157
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-067-4157 5+ Documents (More...)
O-RING 2 EA NS Request Quotation Subscribe to View Vendor Details... 100080 O-RING 99 EA NS Request
Quotation Subscribe to View Vendor Details... 100080 O-RING 9 EA NS Request Quotation Subscribe to View
-0000-000 100080 An enclosure generally fabricated of sheet material designed to accommodate (but does
VALVE,DRAIN,FUEL TANK 2 EA NS Request Quotation Subscribe to View Vendor Details... 100080 VALVE,DRAIN
-0000-000 100080 An enclosure generally fabricated of sheet material designed to accommodate (but does
VALVE,DRAIN,FUEL TANK 2 EA NS Request Quotation Subscribe to View Vendor Details... 100080 VALVE,DRAIN
-0180 ALH-100080 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more
-0100 ALH-100080 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more
Restrictions 5310-01-067-4157
5310-01-067-4157 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-01-067-4157
- National Security Agency (DGX1)
- Effective Date:
- 1 Jan 2014
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HDKEHX
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-067-4157
- Part Number
- Manufacturer
- Status
- 100080
- Manufacturer
- 81580 - Mcculloch Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-067-4157
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.183 Inches Minimum And 0.196 Inches Maximum
- Overall Diameter [ADAV]
- 0.438 Inches Nominal
DLA Procurement Analysis 5310-01-067-4157
Management Data 5310-01-067-4157
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-067-4157
Freight Information 5310-01-067-4157
5310-01-067-4157 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-067-4157 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-067-4157 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-067-4157 is not classified as a special type of cargo when transported by water. 5310-01-067-4157 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-067-4157 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: