Premium Information is available for this item - Upgrade for $1 a day

5310-01-063-3795

Flat Washer

5310010633795 010633795 32823-A 32823AX

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

Managed by United States

NSN Created on 4 Aug 1978

Data Last Changed
November 2023

NATO Update Count
5

NATO Data Quality

5310-01-063-3795 WASHER,FLAT 5310010633795 010633795 1/1 — NSN 5310-01-063-3795 (Generic Image) 1/1

Marketplace 5310-01-063-3795

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

5310-01-063-3795 RQST NE

Updated Every Day

5310-01-063-3795 RQST

Updated Every Day

5310-01-063-3795 RQST NE

Restrictions 5310-01-063-3795

5310-01-063-3795 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

Approved Sources 5310-01-063-3795

Part Number
Manufacturer
Status
32823-A: 45152 - Oshkosh Corp (Active); Primary Buy; RNCC 3 RNVC 2 DAC 1
32823AX: 45152 - Oshkosh Corp (Active); Secondary Buy; RNCC 5 RNVC 2 DAC 1

Subscribe
View Data

DLA Procurement Analysis 5310-01-063-3795

DLA Administrative Lead Time:: Subscribe
DLA Production Lead Time:: Subscribe

Subscribe to View DLA Inventory and Forecast...

Management Data 5310-01-063-3795

Subscribe
View Prices

Effective Date: Organization; Unit of Issue; Unit Price; Qty Unit Pack
Dec 2009: Department of the Army (DA); EA; Subscribe; 1

MOE: USC; Code; Statement; Order of Use; Jump To Code; Qty Per Assy; UOM; Technical Document; Quantative Expression
Department of the Air Force (DF): F; Z; Discontinued-Use 5310-01-253-3157
Department of the Navy (DN): N; Z; Discontinued-Use 5310-01-253-3157
Defense Logistics Agency (DS): I; Z; Discontinued-Use 5310-01-253-3157

Army

Materiel Category and Inventory Manager:

T: Industrial Supplies (DLA/GSA Items)

Appropriation and Budget Activity:

2: Stock Fund Secondary Items

Management Inventory Segment:

2: Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.

Weapons System / End Item / Homogeneous Group:

00: DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item

Accounting Requirements:

X: Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.