Premium Information is available for this item - Upgrade for $1 a day
5310-01-060-1011
Sleeve Nut
5310010601011 010601011 2006013-3 5310PL0748599
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
24
Marketplace 5310-01-060-1011
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-060-1011 2+ Documents (More...)
2006013-3 NUT,SLEEVE RQST NS Request Quotation Updated Every Day 5310-01-060-1011 RQST NE Updated Every
Day 5310-01-060-1011 RQST Updated Every Day 5310-01-060-1011 RQST NE Related Documents 5310-01-060-1011
Sleeve Nut 5310010601011 010601011,2006013-3 Upgrade for $1 a day Upgrade your Account Upgrade
5310-01-060-1011Sleeve Nut5310010601011 010601011 2006013 -3 NUT,SLEEVE 1 EA NS Request Quotation Subscribe
Restrictions 5310-01-060-1011
5310-01-060-1011 is a Sleeve Nut that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-060-1011
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-060-1011
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FUKZ
- Poland (WP01)
- Effective Date:
- 1 Jan 2007
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Feb 2014
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5310-01-060-1011
- Part Number
- Manufacturer
- Status
- 2006013-3
- Manufacturer
- 6K4C8 - Goodrich Corporation (Active)
- Primary Buy
- Primary Buy
- 2006013-3
- 17576 - Goodrich Corp (Replaced)
- Original Design
- Original Design
- 2006013-3
- 6Z056 - Cm Manufacturing Inc (Active)
- Secondary Buy
- Secondary Buy
- 2006013-3
- 4JZH8 - Es3 Prime Logistics Group Inc (Active)
- Secondary Buy
- Secondary Buy
- 2006013-3
- H1632 - Gkn Fokker Aerospace B.V. (Active)
- Secondary Buy
- Secondary Buy
- 2006013-3
- 93953 - Melstrom Manufacturing Corporation (Active)
- Secondary Buy
- Secondary Buy
- 5310PL0748599
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-01-060-1011
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Criticality Code Justification [CRTL]
- Supp
- Cross-Sectional Shape [ANLR]
- Hexagonal Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Thickness [ABKU]
- 0.190 Inches Nominal
- Flange Width Across Flats [AFGG]
- 2.470 Inches Minimum And 2.510 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec 1St Material Response Or Mil-S-5626 Mil Spec 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 4130 Or Steel Comp 4140 Overall
- Nominal Thread Size [CQJX]
- 2.000 Inches
- Nut Diameter [ACTD]
- 2.300 Inches Nominal
- Nut Length [ACVN]
- 1.810 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Special Features [FEAT]
- Six Equally Spaced Slots 0.266 In. Wide And 0.550 In. Deep
- Supplementary Features [SUPP]
- Item Is Not Csi But Has Critical Feature Such As Heat Treatment,Surface Finish,Or Material Type And Special Inspection Requirements Such As Magnetic Particle Inspection Or Fluorescent Penetrant Inspection
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type Ii,Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 16
- Thread Series [BZRR]
- Unj
Weapon Systems (WSDC) 5310-01-060-1011
DLA Procurement Analysis 5310-01-060-1011
- Last Stock Position:
- 208 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-060-1011
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-060-1011
Freight Information 5310-01-060-1011
5310-01-060-1011 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-060-1011 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-060-1011 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-060-1011 is not classified as a special type of cargo when transported by water. 5310-01-060-1011 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-060-1011
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-060-1011 14 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A723F9228
- 13 Jun 2023
- Subscribe
- 53
- Subscribe
- Subscribe
- Subscribe
- SPE4A723F9228
- 13 Jun 2023
- Subscribe
- 53
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F4672
- 06 Apr 2021
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F4672
- 06 Apr 2021
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F3912
- 09 Mar 2021
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F3912
- 09 Mar 2021
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F3576
- 17 Feb 2021
- Subscribe
- 73
- Subscribe
- Subscribe
- Subscribe
- SPE4A721F3576
- 17 Feb 2021
- Subscribe
- 73
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F3121
- 19 Nov 2018
- Subscribe
- 67
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F3120
- 19 Nov 2018
- Subscribe
- 10
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F0830
- 19 Oct 2018
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
- SPE5EY18F401R
- 13 Sep 2018
- Subscribe
- 26
- Subscribe
- Subscribe
- Subscribe
- SPE5EY18F345C
- 21 Aug 2018
- Subscribe
- 7
- Subscribe
- Subscribe
- Subscribe
- SPE5EY18F237V
- 19 Jul 2018
- Subscribe
- 29
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-01-060-1011 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: