Premium Information is available for this item - Upgrade for $1 a day
5310-01-056-5116
Hexagon Plain Nut
5310010565116 010565116 MS35691-73 FF-N-836
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
June 2023
7
Marketplace 5310-01-056-5116
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-01-056-5116 5+ Documents (More...)
FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation MS35691-73 NUT,PLAIN,HEXAGON 1 EA NS Request
MS35691-73 NUT,PLAIN,HEXAGON 1000 EA NS Request Quotation Updated Every Day 5310-01-056-5116 RQST NE
NUT,PLAIN,HEXAGON 1 EA NS Request Quotation FFN836 NUT,PLAIN,HEXAGON 3 EA NS Request Quotation MS35691-73
NUT,PLAIN,HEXAGON 1 EA NS Request Quotation FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation
MS35691-73 NUTXPLAINXHEXAGON 1 EA NS Request Quotation FF-N-836 NUTXPLAINXHEXAGON 1285 EA NS Request
MS35691-73 NUTXPLAINXHEXAGON 1000 EA NS Request Quotation Updated Every Day 5310-00-063-3559 RQST Updated
MS35691-73 NUT,PLAIN,HEXAGON 22 EA NS Request Quotation FFN836.
MS35691-73 NUT,PLAIN,HEXAGON 4 EA NS Request Quotation Subscribe to View Vendor Details...
008913426 Upgrade your Account Upgrade 5310-00-891-3426Hexagon Plain Nut5310008913426 008913426 FF-N-836
Restrictions 5310-01-056-5116
5310-01-056-5116 is a Hexagon Plain Nut that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-056-5116
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-056-5116
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HX
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5310-01-056-5116
- Part Number
- Manufacturer
- Status
- MS35691-73
- Manufacturer
- 96906 - Military Standards (Active)
- Incomplete Standard
- Incomplete Standard
- FF-N-836
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-01-056-5116
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Bearing Surface Type [CRTM]
- Chamfered Or Washer Faced
- Criticality Code Justification [CRTL]
- Matt
- Departure From Cited Designator [ZZZX]
- As Modified By Material
- Departure From Cited Document [ZZZW]
- As Modified By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Size [CQJX]
- 1.000 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 5 Style And B Grade
- Nut Height [ADEA]
- 0.519 Inches Minimum And 0.575 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Width Across Flats [ASDB]
- 1.450 Inches Minimum And 1.500 Inches Maximum
- Special Test Features [SPCL]
- Special Quality Control Testing
- Surface Treatment Document And Classification [STDC]
- Qq-P-416 Type 2 Class 3 Fed Spec All Treatment Responses Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 8
- Thread Series [BZRR]
- Unc
DLA Procurement Analysis 5310-01-056-5116
Management Data 5310-01-056-5116
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-056-5116
Freight Information 5310-01-056-5116
5310-01-056-5116 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-056-5116 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-056-5116 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-056-5116 is not classified as a special type of cargo when transported by water. 5310-01-056-5116 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-056-5116
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-056-5116 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: