Premium Information is available for this item - Upgrade for $1 a day
5310-01-056-4224
Sleeve Nut
5310010564224 010564224 2006013-1 2006013
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
20
Marketplace 5310-01-056-4224
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-056-4224 3+ Documents (More...)
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 2006013
-1 NUT,SLEEVE 99 EA NS Request Quotation Subscribe to View Vendor Details... 2006013-1 NUT,SLEEVE RQST
96504-9S CONNECTOR BODY,PLUG,ELECTRICAL 1 EA NS Request Quotation Subscribe to View Vendor Details... 2006013
5310-01-056-4224Sleeve Nut5310010564224 010564224 2006013-1 NUT,SLEEVE 99 EA NS Request Quotation Subscribe
-3 NUT,SLEEVE 1 EA NS Request Quotation Subscribe to View Vendor Details... 2006013-3 NUT,SLEEVE RQST
Subscribe to View Vendor Details... 2006013-3 NUT,SLEEVE 61 EA NS Request Quotation Subscribe to View
Restrictions 5310-01-056-4224
5310-01-056-4224 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-056-4224
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-056-4224
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FUKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Poland (WP01)
- Effective Date:
- 1 Jan 2007
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5310-01-056-4224
- Part Number
- Manufacturer
- Status
- 2006013-1
- Manufacturer
- 17576 - Goodrich Corp (Replaced)
- Original Design
- Original Design
- 2006013-1
- 6Z056 - Cm Manufacturing Inc (Active)
- Secondary Buy
- Secondary Buy
- 2006013
- 6Z056 - Cm Manufacturing Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2006013-1
- 6K4C8 - Goodrich Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-056-4224
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Hexagonal Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Thickness [ABKU]
- 0.190 Inches Nominal
- Flange Width Across Flats [AFGG]
- 2.470 Inches Minimum And 2.510 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec 1St Material Response Overall Or Mil-S-5626 Mil Spec 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 4130 Overall Or Steel Comp 4140 Overall
- Nominal Thread Size [CQJX]
- 2.000 Inches
- Nut Diameter [ACTD]
- 2.300 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.560 Inches Nominal
- Special Features [FEAT]
- Six Slots On The Nut End 0.133 In. W And 0.450 Deep
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty Ii,Cl 2 Fed Spec 1St Treatment Response Overall And Mil-P-23377 Mil Spec 2Nd Treatment Response Overall Or Mil-C-83286 Mil Spec 2Nd Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Paint Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 16
- Thread Series [BZRR]
- Unj
Weapon Systems (WSDC) 5310-01-056-4224
DLA Procurement Analysis 5310-01-056-4224
- Last Stock Position:
- 98 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-056-4224
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-01-056-4224
Freight Information 5310-01-056-4224
5310-01-056-4224 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-056-4224 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-056-4224 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-056-4224 is not classified as a special type of cargo when transported by water. 5310-01-056-4224 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-056-4224
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5310-01-056-4224 4 Records
Contracting Technical Data File (CTDF) 5310-01-056-4224 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: