Premium Information is available for this item - Upgrade for $1 a day

5310-01-055-6080

Flat Washer

5310010556080 010556080 5100103-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-01-055-6080 WASHER,FLAT 5310010556080 010556080

Managed by United States
NSN Created on 8 Feb 1978
Data Last Changed
November 2023
NATO Update Count
20
NATO Data Quality
AAGR Style 1 for 5310-01-055-6080 1/3
NSN 5310-01-055-6080 (Identification) 1/3
ABMW Style 1 for 5310-01-055-6080 2/3
NSN 5310-01-055-6080 (Identification) 2/3
ABMX Style 1 for 5310-01-055-6080 3/3
NSN 5310-01-055-6080 (Identification) 3/3

5310-01-055-6080 Stock and Availability Marketplace 5310-01-055-6080

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-01-055-6080 RQST NE eBay
eBay Updated Every Day
5310-01-055-6080 RQST eBay
Amazon Updated Every Day
5310-01-055-6080 RQST NE Amazon

5310-01-055-6080 Demil Restrictions 5310-01-055-6080

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: U | EDC: | ADPEC:

5310-01-055-6080 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

5310-01-055-6080 HTS and ScheduleB Import and Export 5310-01-055-6080

5310-01-055-6080 End Users End Users 5310-01-055-6080

US Air Force (FUGI)
Effective Date:
1 Jun 2005
Former MOE Rule:
FUKZ
US Navy (N9BZ)
Effective Date:
1 Dec 2013
Supplementary Collaborators:
GG
Poland (WP01)
Effective Date:
1 Jan 2007
Israel (YD01)
Effective Date:
1 Apr 1991
Republic of Korea (ZH01)
Effective Date:
1 Oct 2002
Denmark (ZS01)
Effective Date:
1 Aug 2001
Norway (ZT01)
Effective Date:
1 Apr 1991
Turkey (ZW01)
Effective Date:
1 Dec 1995

5310-01-055-6080 Manufacturers Approved Sources 5310-01-055-6080

5310-01-055-6080 Technical Data Datasheet 5310-01-055-6080

Characteristic
Specifications
FIIG
A022B0
Center Hole Shape Style [ABMX]
Round
Cross-Sectional Shape Style [AAGR]
Rectangular
Hole Diameter [AAUB]
0.043 Inches Minimum And 0.053 Inches Maximum
Material [MATT]
Steel Overall
Material Document And Classification [MDCL]
Ams 5062 Assn Std Single Material Response Overall
Overall Diameter [ADAV]
0.140 Inches Minimum And 0.150 Inches Maximum
Peripheral Shape Style [ABMW]
Round
Thickness [ABNM]
0.004 Inches Minimum And 0.006 Inches Maximum

5310-01-055-6080 Weapon Systems (WSDC) Weapon Systems (WSDC) 5310-01-055-6080

5310-01-055-6080 Stock, Inventory and Procurement DLA Procurement Analysis 5310-01-055-6080

Last Stock Position:
429 In Stock
DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5310-01-055-6080 Management Data Management Data 5310-01-055-6080

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Mar 2023
Department of the Navy (DN)
EA
Subscribe
Oct 2022
Department of the Air Force (DF)
EA
Subscribe
Nov 2021
Department of the Air Force (DF)
EA
Subscribe
Oct 2020
Department of the Air Force (DF)
EA
Subscribe
Oct 2019
Department of the Air Force (DF)
EA
Subscribe
MOE
USC
Code
Statement
Order of Use
Jump To Code
Qty Per Assy
UOM
Technical Document
Quantative Expression
Department of the Navy (DN)
N
X
Formerly 5365
Defense Logistics Agency (DS)
I
X
Formerly 5365

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Aggregation Code:
YP
GAS TURBINES AND JET ENGINES NON-AIRCRAFT
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

5310-01-055-6080 Related Items NATO Stock Numbers Related to 5310-01-055-6080

5310-01-055-6080 Freight Data Freight Information 5310-01-055-6080

5310-01-055-6080 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-055-6080 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5310-01-055-6080 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-055-6080 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-055-6080 is not classified as a special type of cargo when transported by water. 5310-01-055-6080 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5310-01-055-6080 Packaging Data Packaging Data 5310-01-055-6080

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
2lb or less, one dimension 2" or less, other dimensions less than 24"
Above 110G
No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
--
--
--
--
Physical Protection
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
No Requirement
No Requirement
Not Applicable
Any Suitable Container
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
--

5310-01-055-6080 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5310-01-055-6080 February 2021

Criticality and Quality

Critical Item Code:
X
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
L

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: