Premium Information is available for this item - Upgrade for $1 a day
5310-01-037-4222
Flat Washer
5310010374222 010374222 67218
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
7
Marketplace 5310-01-037-4222
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-037-4222 5+ Documents (More...)
+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-037-4222 Flat Washer 5310010374222
5310-01-037-4222 RQST Updated Every Day 5310-01-037-4222 RQST NE Related Documents 5310-01-037-4222
https//www.nsnlookup.com /fsg-53/fsc-5340/br 5340-19-000-2986 Angle Bracket 5340190002986190002986 145-67218
Flat Washer 5310010374222 010374222,67218 Quotation Subscribe to View Vendor Details... 67218 https
/www.nsnlookup.com /fsg-49/fsc-4920/us 4920-00-249-5588 Velocity Mete Level 4920002495588002495588 67218
$1 a day Upgrade your Account Upgrade 4920-00-249 -5588Velocity Mete Level4920002495588 002495588 67218
6-67218 A preformed wire fastening device bent to form a spring at one end, one prong being extended
Flat Washer 5310010374222 010374222,67218 Every Day 67218 RQST NE Updated Every Day 5365 https/
-S 691609 67218 A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight
011323147 Quotation Subscribe to View Vendor Details ... 67218 https//www.nsnlookup.com /fsg-53/fsc-
Restrictions 5310-01-037-4222
5310-01-037-4222 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-037-4222
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-037-4222
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-037-4222
- Part Number
- Manufacturer
- Status
- 67218
- Manufacturer
- 1PQF4 - Cae Usa Inc. (Active)
- Primary Buy
- Primary Buy
- 67218
- 36378 - Raytheon Technical Services Company (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-037-4222
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.251 Inches Minimum And 0.254 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-B-613,Temper Half Hard Fed Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy 260 Overall
- Overall Diameter [ADAV]
- 0.375 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.031 Inches Nominal
Similar Supply Items to 5310-01-037-4222
Freight Information 5310-01-037-4222
5310-01-037-4222 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-037-4222 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-037-4222 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-037-4222 is not classified as a special type of cargo when transported by water. 5310-01-037-4222 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-037-4222
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement