Premium Information is available for this item - Upgrade for $1 a day
5310-01-029-1296
Sleeve Nut
5310010291296 010291296 6643198-11 6643225-11 K-6643225-011 6643225 PIECE 11
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
9
Marketplace 5310-01-029-1296
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-029-1296 3+ Documents (More...)
RQST NE Updated Every Day 5310-01-029-1296 RQST Updated Every Day 5310-01-029-1296 RQST NE Related
Documents 5310-01-029-1296 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310
Sleeve Nut 5310010291296 010291296,6643198-11 Upgrade for $1 a day Upgrade your Account Upgrade
5310-01-029-1296Sleeve Nut5310010291296 010291296 6643198 www.nsnlookup.com /fsg-53/fsc-5310/us 5310
1 | CRITICALITY : S | HMIC : N | PMIC : A | EDC https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-029-1296
Sleeve Nut 5310010291296 010291296,6643198-11 Upgrade your Account Upgrade 5310-01-029-1296Sleeve
Restrictions 5310-01-029-1296
5310-01-029-1296 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-029-1296
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-029-1296
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHXHD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
Approved Sources 5310-01-029-1296
- Part Number
- Manufacturer
- Status
- 6643225 PIECE 11
- Manufacturer
- 01289 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 6643198-11
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
- 6643225-11
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
- K-6643225-011
- 01289 - General Electric Company (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-01-029-1296
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Thread Series [BZRR]
- Un
- Nominal Thread Size [CQJX]
- 2.500 Inches
- Thread Quantity Per Inch [CMLP]
- 8
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Material [MATT]
- Steel Overall
- Surface Treatment [SFTT]
- Copper Overall
- Nut Style [ACTA]
- Sleeve
- Nut Diameter [ACTD]
- 3.880 Inches Nominal
- Nut Length [ACVN]
- 3.760 Inches Nominal
- Boss Thickness [ADBP]
- 1.260 Inches Nominal Overall
- Boss Width Across Flats [AFGJ]
- 1.880 Inches Nominal
- Nut Counterbore Depth [ADFK]
- 3.120 Inches Nominal Nut
- Counterbore Diameter [AAWY]
- 2.620 Inches Nominal Nut
- Cross-Sectional Shape [ANLR]
- Round Nut
- Cross-Sectional Shape [ANLR]
- Round Boss
Weapon Systems (WSDC) 5310-01-029-1296
DLA Procurement Analysis 5310-01-029-1296
- Last Stock Position:
- 6 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-029-1296
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-029-1296
Freight Information 5310-01-029-1296
5310-01-029-1296 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-029-1296 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-029-1296 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-01-029-1296 is not classified as a special type of cargo when transported by water. 5310-01-029-1296 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-029-1296 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: