Premium Information is available for this item - Upgrade for $1 a day
5310-01-025-5797
Sleeve Nut
5310010255797 010255797 DV-68001 223076-001
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
5
Marketplace 5310-01-025-5797
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-025-5797 2+ Documents (More...)
BUY NE FedMall Updated Every Day 5310-01-025-5797 RQST NE Updated Every Day 5310-01-025-5797 RQST
Updated Every Day 5310-01-025-5797 RQST NE Related Documents 5310-01-025-5797 4+ Documents ( More...
www.nsnlookup.com /fsg-58/fsc-5840/dk 5840-22-285-1356 Circuit Card Assembly 5840222851356222851356 223076-001
Restrictions 5310-01-025-5797
5310-01-025-5797 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-025-5797
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-025-5797
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5310-01-025-5797
- Part Number
- Manufacturer
- Status
- DV-68001
- Manufacturer
- 02995 - Oppenheimer Precision Products Inc (Active)
- Primary Buy
- Primary Buy
- 223076-001
- 81413 - Bae Systems Information And (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5310-01-025-5797
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Round Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Diameter [ABKK]
- 0.400 Inches Nominal
- Flange Thickness [ABKU]
- 0.020 Inches Minimum And 0.025 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-200/3,T4 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Nut Diameter [ACTD]
- 0.312 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.190 Inches Minimum And 0.195 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Direction [AAJF]
- Left-Hand
- Thread Pitch Diameters [AAJE]
- +0.2297/+0.2360 Inches
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series [BZRR]
- Unef
DLA Procurement Analysis 5310-01-025-5797
Management Data 5310-01-025-5797
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-025-5797
Freight Information 5310-01-025-5797
5310-01-025-5797 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-01-025-5797 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-01-025-5797 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-025-5797 is not classified as a special type of cargo when transported by water. 5310-01-025-5797 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-01-025-5797 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: