Premium Information is available for this item - Upgrade for $1 a day
5310-01-023-9106
Flat Washer
5310010239106 010239106 4S9191 4S-9191
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
20
Marketplace 5310-01-023-9106
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-023-9106 3+ Documents (More...)
Restrictions 5310-01-023-9106
5310-01-023-9106 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-023-9106
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-023-9106
- New Zealand (ZE01)
- Effective Date:
- 1 May 1996
- France (ZF01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-023-9106
- Part Number
- Manufacturer
- Status
- 4S9191
- Manufacturer
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
- 4S9191
- U3363 - Caterpillar Tractor Co Ltd (Obsolete)
- Secondary Buy
- Secondary Buy
- 4S-9191
- HD208 - Pon Equipment B.V. (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-01-023-9106
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.469 Inches Nominal
- Material [MATT]
- Steel Overall
- Material Document And Classification [MDCL]
- 1E2174,Fscm 11083 Mfr Ref Single Material Response Overall
- Overall Diameter [ADAV]
- 0.875 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.188 Inches Nominal
NATO Stock Numbers Related to 5310-01-023-9106
Freight Information 5310-01-023-9106
5310-01-023-9106 has freight characteristics managed by the Southwestern Power Administration.. 5310-01-023-9106 has a variance between NMFC and UFC when transported by rail and the description should be consulted.