Premium Information is available for this item - Upgrade for $1 a day
5310-01-023-1959
Flat Washer
5310010231959 010231959 4NYLON THYJ0401
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
9
Marketplace 5310-01-023-1959
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-023-1959 5+ Documents (More...)
Restrictions 5310-01-023-1959
5310-01-023-1959 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-023-1959
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-023-1959
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Saudi Arabia (YS01)
- Effective Date:
- 1 Feb 2015
Approved Sources 5310-01-023-1959
- Part Number
- Manufacturer
- Status
- 4NYLON
- Manufacturer
- 70318 - Allmetal Screw Products Corp (Active)
- Primary Buy
- Primary Buy
- THYJ0401
- 56190 - Metadure Parts & Sales, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-023-1959
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.089 Inches Minimum And 0.099 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-M-20693,Type 1 Mil Spec 1St Material Response Overall Or L-P-509,Type 4,Grade G-7 Fed Spec 2Nd Material Response Overall
- Material [MATT]
- Plastic Polyhexamethylene Amide Overall Or Plastic Silicone Overall
- Overall Diameter [ADAV]
- 0.276 Inches Minimum And 0.286 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Special Features [FEAT]
- Color White
- Thickness [ABNM]
- 0.010 Inches Minimum And 0.030 Inches Maximum
NATO Stock Numbers Related to 5310-01-023-1959
Freight Information 5310-01-023-1959
5310-01-023-1959 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 5310-01-023-1959 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 5310-01-023-1959 is rated as class 65 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 5310-01-023-1959 is not classified as a special type of cargo when transported by water. 5310-01-023-1959 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-023-1959
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --