Premium Information is available for this item - Upgrade for $1 a day
5310-01-013-5463
Flat Washer
5310010135463 010135463 1107101 110-7101 DIN125-ST-A4C 110-7098 80000157
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
12
Marketplace 5310-01-013-5463
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-013-5463 5+ Documents (More...)
5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-013-5463 Flat Washer 5310010135463
110-7098 /fsg-61/fsc-6130/it 6130-15-110-7098 /fsg-61/fsc-6130/it 6130-15 Day 6130-15-110-7098 https/
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 1107101
Restrictions 5310-01-239-3406 DEMIL: A | DEMILI https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-013-5463
/fsg-61/fsc-6130/it 6130-15-110-7098 /fsg-61/fsc-6130/it 6130-15-110-7098 /fsg-61/fsc-6130/it 6130-15
Ventilatorespeciale 6130151107098151107098 08539 6130/it 6130-15-110-7098 Day 6130-15-110-7098 01-013
RQST Updated Every Day 5895-00-110-7098 RQST NE Related Documents 5895-00-110-7098 2+ Documents ( More
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-013-5463 Flat Washer 5310010135463 010135463,1107101
www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-412-4042 Flat Washer 5310014124042 014124042,1107101 1107101
Flat Washer 5310010135463 010135463,1107101 Upgrade for $1 a day Upgrade your Account Upgrade 5310
Restrictions 5310-01-013-5463
5310-01-013-5463 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-013-5463
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-013-5463
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZCLBD
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Feb 2004
- Malaysia (YW01)
- Effective Date:
- 1 May 2000
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-01-013-5463
- Part Number
- Manufacturer
- Status
- 1107101
- Manufacturer
- 36719 - Wartsila Canada Inc (Active)
- Primary Buy
- Primary Buy
- 110-7101
- 62445 - Deutz Corporation (Active)
- Primary Buy
- Primary Buy
- 1107101
- 62445 - Deutz Corporation (Active)
- Primary Buy
- Primary Buy
- DIN125-ST-A4C
- D8286 - Din Deutsches Institut Fur Normung (Active)
- Secondary Buy
- Secondary Buy
- 110-7098
- 36719 - Wartsila Canada Inc (Active)
- Secondary Buy
- Secondary Buy
- 80000157
- 27401 - Caterpillar Paving Products Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-013-5463
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 8.4 Millimeters Nominal
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 17.0 Millimeters Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Din267 Sheet 9 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Zinc Overall And Chromate Overall
- Thickness [ABNM]
- 1.4 Millimeters Nominal
Weapon Systems (WSDC) 5310-01-013-5463
DLA Procurement Analysis 5310-01-013-5463
- Last Stock Position:
- 536 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-013-5463
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-01-013-5463
Freight Information 5310-01-013-5463
5310-01-013-5463 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-013-5463 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-013-5463 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-013-5463 is not classified as a special type of cargo when transported by water. 5310-01-013-5463 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-013-5463
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-01-013-5463 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: