Premium Information is available for this item - Upgrade for $1 a day
5310-01-005-6726
Plate Nut Spacer
5310010056726 010056726 ST4M172N6
An item having two flat bearing surfaces, conforming to the same shape as the base of a NUT (1), PLAIN, PLATE and NUT (1), SELF-LOCKING, PLATE. It is used to provide better alignment in assembly. View more Plate Nut Spacer
November 2023
4
Marketplace 5310-01-005-6726
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-005-6726 2+ Documents (More...)
Plate Nut Spacer 5310010056726 010056726 Max By 90 DegSurface Treatment Document And Classification
Restrictions 5310-01-005-6726
5310-01-005-6726 is a Plate Nut Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-01-005-6726
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-005-6726
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5310-01-005-6726
- Part Number
- Manufacturer
- Status
- ST4M172N6
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-01-005-6726
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Distance From Aperture Center To Mounting Hole Center [ADFW]
- 0.495 Inches Minimum And 0.505 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/4,Alloy 2024,Temper T81 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall
- Mounting Hole Countersink Angle [CSSM]
- 98.0 Degrees Minimum And 102.0 Degrees Maximum
- Mounting Hole Diameter [ABTB]
- 0.128 Inches Minimum And 0.133 Inches Maximum
- Mounting Hole Arrangement Style [ADFU]
- 2 Holes
- Mounting Provision Location [ADFR]
- Nut Projection Side
- Nut Mounting Provision [ADFP]
- Countersunk Holes
- Nut Style [ACTA]
- Plate Nut Spacer
- Nut Length [ACVN]
- 1.122 Inches Maximum
- Plate Thickness [ADEB]
- 0.060 Inches Minimum And 0.066 Inches Maximum
- Special Features [FEAT]
- Aperture Dia Chamfered 0.750 In. Min 0.760 In. Max By 90 Deg
- Surface Treatment Document And Classification [STDC]
- Mms-425,Fscm T6301 Mfr Ref 1St Treatment Response Overall Or Mil-A-8625 Mil Spec 2Nd Treatment Response Overall
- Surface Treatment [SFTT]
- Paint Overall Or Anodize Overall
- Thru-Hole Diameter [ADAZ]
- 0.660 Inches Minimum And 0.670 Inches Maximum
Weapon Systems (WSDC) 5310-01-005-6726
DLA Procurement Analysis 5310-01-005-6726
- Last Stock Position:
- 851 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-005-6726
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-005-6726
Freight Information 5310-01-005-6726
5310-01-005-6726 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-01-005-6726 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-01-005-6726 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-005-6726 is not classified as a special type of cargo when transported by water. 5310-01-005-6726 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-005-6726
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-005-6726 2 Records
Contracting Technical Data File (CTDF) 5310-01-005-6726 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: