Premium Information is available for this item - Upgrade for $1 a day
5310-00-993-1845
Cap Plain Nut
5310009931845 009931845 02055 C5947-2-4-40 G221013-5 54220770 4-40
An item internally threaded from one end, and completely inclosed on the opposite end. The outer periphery parallel to the threaded axis may be square, cylindrical, hexagonal, octagonal, or dodecagonal and taper to a cone or dome shape on the closed end. For like items which are stamped or formed from sheet stock, see NUT (1), STAMPED. For similar items which are flat on top and bottom see NUT (1), SLEEVE or POST, ELECTRICAL-MECHANICAL EQUIPMENT. View more Cap Plain Nut
November 2023
21
Marketplace 5310-00-993-1845
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-993-1845 5+ Documents (More...)
G221013-5 An item internally threaded from one end, and completely inclosed on the opposite end
Approved Sources 5310-00-613-8899 Part NumberManufacturerStatusC5947-2-4-40 70318 - Allmetal Screw Products
(Active) Primary Buy RNCC 3 RNVC 2 DAC 2 54220770 70318 - Allmetal Screw Products Corp (Active) Secondary
AssyUOMTechnical DocumentQuantative ExpressionDepartment of the Navy (DN)NZDiscontinued-Use 5310-00-993-1845
5 11 May 1976 5305-00-959-2730 Machine Screw 1-72-9-16RNCC: C | RNVC: 1 | DAC: 5 1 Jan 1962 5310-00-993-1845
PBF1254-4-40 VS3037-4-40 VAL23607-4-40 S11-1061-4-40 MB88-4-40 MA5497-4-40 BM17019-4-40X ST3M497-4-40
Approved Sources 5306-01-044-2987 Part NumberManufacturerStatus109450-4-40 80539 - Sps Technologies,
ST3M507-4-40 VS3038-4-40 VAL23608-4-40 BM17019-4-40Y 109453-4-40Y An externally threaded fastener whose
Approved Sources 5306-01-045-2432 Part NumberManufacturerStatusMB89-4-40 73197 - Hi-Shear Corporation
Restrictions 5310-00-993-1845
5310-00-993-1845 is a Cap Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-993-1845
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-993-1845
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEJBHD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5310-00-993-1845
- Part Number
- Manufacturer
- Status
- 02055
- Manufacturer
- 14153 - Defense Logistics Agency (Active)
- Primary Buy
- Primary Buy
- 4-40
- 77250 - Allied Products Corp Pheoll Mfg Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- C5947-2-4-40
- 70318 - Allmetal Screw Products Corp (Active)
- Transferred
- Transferred
- G221013-5
- 3B4M0 - Lucent Technologies Inc (Active)
- Transferred
- Transferred
- 54220770
- 70318 - Allmetal Screw Products Corp (Active)
- Transferred
- Transferred
- 54220770
- 95750 - Airco Republic Electronics, Inc. (Active)
- Transferred
- Transferred
- G221013-5
- 70408 - At And T Corp (Obsolete)
- Transferred
- Transferred
Datasheet 5310-00-993-1845
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Thread Series [BZRR]
- Unc
- Nominal Thread Size [CQJX]
- 0.112 Inches
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Material [MATT]
- Steel Corrosion Resisting Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Nut Style [ACTA]
- Cap
- Nut Height [ADEA]
- 0.250 Inches Nominal
- Width Across Flats [ASDB]
- 0.250 Inches Nominal
- Bearing Surface Type [CRTM]
- Washer Faced
Weapon Systems (WSDC) 5310-00-993-1845
DLA Procurement Analysis 5310-00-993-1845
- Last Stock Position:
- 208 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-993-1845
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-00-993-1845
Freight Information 5310-00-993-1845
5310-00-993-1845 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-993-1845 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-993-1845 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-993-1845 is not classified as a special type of cargo when transported by water. 5310-00-993-1845 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-993-1845
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-993-1845 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: