Premium Information is available for this item - Upgrade for $1 a day
5310-00-958-9396
Sleeve Nut
5310009589396 009589396 15-835-3 868030-3 1149160 11290554
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
May 2023
11
Marketplace 5310-00-958-9396
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-958-9396 2+ Documents (More...)
United States (US) 4. 5310-00-958-9396 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5310-00-958-9396 RQST Updated Every Day 5310-00-958-9396 RQST NE Related
Sleeve Nut 5310009589396 009589396,15-835-3 Upgrade for $1 a day Upgrade your Account Upgrade 5310
-00-958-9396Sleeve Nut5310009589396 009589396 15-835 www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-958
Restrictions 5310-00-958-9396
5310-00-958-9396 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-958-9396
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-958-9396
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- NASA (G860)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-958-9396
- Part Number
- Manufacturer
- Status
- 15-835-3
- Manufacturer
- 15605 - Eaton Corp (Active)
- Primary Buy
- Primary Buy
- 1149160
- 23667 - Smiths Detection Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 11290554
- 17773 - Ballistic Missile Defense Systems (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 15-835-3
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
- 868030-3
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-958-9396
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Countersink Angle [CRSQ]
- 60.0 Degrees Nominal Nut
- Cross-Sectional Shape [ANLR]
- Hexagonal Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Thickness [ABKU]
- 0.060 Inches Minimum And 0.070 Inches Maximum
- Flange Width Across Flats [AFGG]
- 0.422 Inches Minimum And 0.454 Inches Maximum
- Material [MATT]
- Steel Comp 303 Overall
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Nut Diameter [ACTD]
- 0.304 Inches Minimum And 0.309 Inches Maximum
- Nut Counterbore Depth [ADFK]
- 0.095 Inches Nominal Nut
- Nut Length [ACVN]
- 0.134 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Overall
- Surface Treatment Document And Classification [STDC]
- Mil-F-14072,E300 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Pitch Diameters [AAJE]
- +0.2338/+0.2367 Inches
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Series [BZRR]
- Uns
Weapon Systems (WSDC) 5310-00-958-9396
DLA Procurement Analysis 5310-00-958-9396
Management Data 5310-00-958-9396
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-958-9396
Freight Information 5310-00-958-9396
5310-00-958-9396 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 107340. A Sub NMFC of X. It has a NMFC Description of TURNBUCKLES/SLEEVE NUTS NOI I/S. 5310-00-958-9396 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55190 which rates the freight between FCL and LCL. 5310-00-958-9396 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-958-9396 is not classified as a special type of cargo when transported by water. 5310-00-958-9396 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-958-9396
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-958-9396 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: