5310-00-957-1764
Flat Washer
5310009571764 009571764 N402P69C6
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-00-957-1764
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-957-1764 1+ Documents (More...)
Restrictions 5310-00-957-1764
5310-00-957-1764 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Approved Sources 5310-00-957-1764
- Part Number
- Manufacturer
- Status
- N402P69C6
- Manufacturer
- 03538 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- N402P69C6
- 24446 - General Electric Company (Active)
- Secondary Buy
- Secondary Buy