Premium Information is available for this item - Upgrade for $1 a day
5310-00-955-6183
Sleeve Nut
5310009556183 009556183 60B46563 16-1550
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
26
Marketplace 5310-00-955-6183
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-955-6183 5+ Documents (More...)
Request Subscribe to View Vendor Details... 60B4-1A NUT,SWAY BRACE PAD 2 EA NS Request Quotation 60B46563
NUT,SWAY BRACE PAD 189 EA NS Request Quotation Subscribe to View Vendor Details... 60B46563 NUT,SWAY
NATO Organizations to reference the physical entity known as Programmable Control Systems located at 16-1550
L0U02 refers to Programmable Control Systems located at 16-1550 Yorkton Court, Burlington, On, L7P 5B7
-115-3522 is a Retaining Strap Approved Sources 5340-15-115-3522 Part NumberManufacturerStatus538-16-1550
Rheinmetall Bae Systems Land Limited (Active) NATO Reference RNCC 6 RNVC 9 DAC 9 F461-C9-1C-30-25-16-1550
NumberManufacturerStatus554116155000 A1140 - Leonardo Spa Divisione Sistemi Di (Active) RNCC 2 RNVC 3 DAC 2 541-16-1550
Restrictions 5310-00-955-6183
5310-00-955-6183 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-955-6183
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-955-6183
- US Air Force (FGGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Poland (WP01)
- Effective Date:
- 1 Nov 2006
- Brazil (YA01)
- Effective Date:
- 1 Oct 2000
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Philippines (ZM01)
- Effective Date:
- 1 Feb 2015
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Jan 1997
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-955-6183
- Part Number
- Manufacturer
- Status
- 60B46563
- Manufacturer
- 12116 - Nammo Defense Systems Inc. (Active)
- Primary Buy
- Primary Buy
- 16-1550
- 76823 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-955-6183
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Boss Diameter [ADBN]
- 0.937 Inches Nominal
- Boss Thickness [ADBP]
- 0.125 Inches Nominal
- Countersink Angle [CRSQ]
- 90.0 Degrees Nominal Both Ends
- Cross-Sectional Shape [ANLR]
- Hexagonal Nut
- Material Document And Classification [MDCL]
- Mil-S-6758,Cond F4 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 4130 Overall
- Nominal Thread Size [CQJX]
- 0.750 Inches
- Nut Length [ACVN]
- 0.250 Inches Nominal
- Nut Width Across Flats [AFGH]
- 1.125 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type I,Class 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unf
- Thread Quantity Per Inch [CMLP]
- 16
Weapon Systems (WSDC) 5310-00-955-6183
DLA Procurement Analysis 5310-00-955-6183
- Last Stock Position:
- 1367 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-955-6183
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- GG
- GUNNERY EQUIPMENT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-955-6183
Freight Information 5310-00-955-6183
5310-00-955-6183 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 107340. A Sub NMFC of X. It has a NMFC Description of TURNBUCKLES/SLEEVE NUTS NOI I/S. 5310-00-955-6183 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55190 which rates the freight between FCL and LCL. 5310-00-955-6183 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-955-6183 is not classified as a special type of cargo when transported by water. 5310-00-955-6183 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-955-6183
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-955-6183 1 Records
Contracting Technical Data File (CTDF) 5310-00-955-6183 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: