Premium Information is available for this item - Upgrade for $1 a day
5310-00-951-0407
Flat Washer
5310009510407 009510407 550-115-031 S9514
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
5
Marketplace 5310-00-951-0407
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-951-0407 5+ Documents (More...)
(Identification) 1/3 NSN 5310-00-951-0407 (Identification) 2/3 NSN 5310-00-951-0407 (Identification
S9514 WASHER,FLAT 174 EA NS Request Quotation Updated Every Day 5310-00-951-0407 RQST NE Updated Every
/fsg-61/fsc-6105/us
-F9-MMC-010 FIG&IND 7-2-122 S9514-F9-MMC-010 FIG&IND 7-2-1 Managed by United States NSN Created on 24
Flat Washer 5310009510407 009510407 8576Male Rotor Nrp6105016068576 016068576 064-48973-000S9514
-F9-MMC-010 FIG&IND 7-2-108 S9514-F9-MMC-010-FIG&IND 7-2-1 Managed by United States NSN Created on 24
Flat Washer 5310009510407 009510407 8576Male Rotor Nrp6105016068576 016068576 064-48973-000 S9514
-GG-MMC-010 ITEM 41 S9514-GG-MMC-010 FIGURE 7-3 PCC-FG-00775 023-28553-000 An item of solid one-piece
www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-694-3707 Fluid Flow Restrictor 4730016943707016943707 S9514
-C8-MMA-010 F-I 7-7-0 S9514-C8-MMA-010 F&I 7-1-48 376-84450D006 An apparatus designed to lower the temperature
https//www.nsnlookup.com /fsg-44/fsc-4420/us 4420-01-515-8358 Industrial Fluid Cooler 4420015158358 S9514
Restrictions 5310-00-951-0407
5310-00-951-0407 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-951-0407
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-951-0407
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-951-0407
- Part Number
- Manufacturer
- Status
- S9514
- Manufacturer
- 12511 - Simmonds Precision Products Inc (Active)
- Primary Buy
- Primary Buy
- 550-115-031
- 1L160 - Superior Washer & Gasket Corp. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 5310-00-951-0407
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.135 Inches Minimum And 0.145 Inches Maximum
- Material [MATT]
- Plastic Polytetrafluoroethylene Overall
- Overall Diameter [ADAV]
- 0.300 Inches Minimum And 0.320 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.026 Inches Minimum And 0.036 Inches Maximum
DLA Procurement Analysis 5310-00-951-0407
- Last Stock Position:
- 29 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-951-0407
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-951-0407
Freight Information 5310-00-951-0407
5310-00-951-0407 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-951-0407 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-951-0407 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-951-0407 is not classified as a special type of cargo when transported by water. 5310-00-951-0407 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-951-0407
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-951-0407 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: