Premium Information is available for this item - Upgrade for $1 a day
5310-00-924-8396
Hexagon Plain Nut
5310009248396 009248396 510883
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
May 2023
18
Marketplace 5310-00-924-8396
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-924-8396 5+ Documents (More...)
on A3-510883 A3-510883 BW510883 -1 510883-1 A3-510883-1 FK9522Z0785 A length of nonmetallic hose with
BW510883 A3-510883 -510883 BW510883 A3-510883 BW510883-1 510883 hose with fittings on A3-510883A3 -510883
BW510883 A3-510883 -510883 BW510883 A3-510883 BW510883-1 510883 hose with fittings on A3-510883A3 -510883
BW510883 A3-510883 with with fittings on A3-510883A3 -510883 BW510883 A3-510883 BW510883-1 510883-1
A3-510883 BW510883-1 510883-1 A3-510883-1 FK9522Z0785 A length of nonmetallic hose with fittings on
BW510883-1510883-1A3-510883-1FK9522Z0785 -510883 BW510883-1510883-1A3-510883-1FK9522Z0785 A length of
-1A3- 510883A3 -510883 BW510883 A3-510883 -510883 BW510883 A3-510883 BW510883-1 510883 hose with fittings
-1A3-510883 A3-510883 BW510883-1 510883-1 A3-510883-1 FK9522Z0785 Circuit Card Assembly 6930144115927144115927
-1A3-510883 A3-510883 BW510883-1 510883-1 A3-510883-1 FK9522Z0785 BW510883 A3-510883 -510883 BW510883
A3-510883 BW510883-1 510883 hose with fittings on A3-510883A3 -510883 BW510883 A3-510883 with with fittings
Restrictions 5310-00-924-8396
5310-00-924-8396 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-924-8396
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-924-8396
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Supplementary Collaborators:
- SX
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-924-8396
- Part Number
- Manufacturer
- Status
- 510883
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 510883
- J1695 - Kito Mfg Co. Ltd (Active)
- Secondary Buy
- Secondary Buy
- 510883
- 02602 - Aerojet Rocketdyne Of De, Inc (Active)
- Secondary Buy
- Secondary Buy
- 510883
- 97139 - The Slabe Machine Products Llc (Active)
- Secondary Buy
- Secondary Buy
- 510883
- 27618 - Taylor Machine Works Inc (Active)
- Secondary Buy
- Secondary Buy
- 510883
- 61062 - Comet Mfg Co Inc (Obsolete)
- Secondary Buy
- Secondary Buy
- 510883
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 510883
- S0254 - Kito Mfg Co. Ltd (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 510883
- 04861 - Cooper Industries Inc Cooper (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-924-8396
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Drilled Hole Diameter [AGGP]
- 0.045 Inches Nominal
- End Item Identification [AGAV]
- Aircraft, F-111;Engine, Aircraft, Tf-33-P-7 (C-141A/B);Engine, Aircraft Tf33-P-3/5/9 (C/Ec-135, B-52H);Engine, Aircraft Tf33-Pw-102 (C-135E, Ec-135H/K/P);Engine, Aircraft Tf-30
- Bearing Surface Type [CRTM]
- Chamfered
- Hole Configuration Style [CRHC]
- Configuration B
- Hole Type And Quantity [ALET]
- 2 Drilled
- Material [MATT]
- Steel Comp 8740 Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches
- Nut Height [ADEA]
- 0.115 Inches Nominal
- Nut Style [ACTA]
- Hexagon
- Material Document And Classification [MDCL]
- Ams 6322 Assn Std Single Material Response Overall
- Width Across Flats [ASDB]
- 0.410 Inches Nominal
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unf
- Thread Quantity Per Inch [CMLP]
- 32
DLA Procurement Analysis 5310-00-924-8396
Management Data 5310-00-924-8396
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-924-8396
Freight Information 5310-00-924-8396
5310-00-924-8396 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-924-8396 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-924-8396 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-924-8396 is not classified as a special type of cargo when transported by water. 5310-00-924-8396 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-924-8396
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-924-8396 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: