Premium Information is available for this item - Upgrade for $1 a day
5310-00-923-1924
Hexagon Plain Nut
5310009231924 009231924 FF-N-836 MS45905-S5 99891A120 MS45905S5
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
November 2023
8
Marketplace 5310-00-923-1924
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-00-923-1924 5+ Documents (More...)
MS45905S5 NUT,PLAIN,HEXAGON 26 EA NS Request Quotation FedMall Updated Every 15 Minutes 5310-00-923-1924
BUY NE FedMall Updated Every Day 5310-00-923-1924 RQST NE Updated Every Day 5310-00-923-1924 RQST Updated
FF-N-836 TY2ST13GRAGPC 121743 A48ZC A nut, flat on top and bottom having 6 flat sides.
,PLAIN,HEXAGON 126 HD NS Request Quotation FF-N836 NUT,PLAIN,HEXAGON 226 HD NS Request Quotation FF-N-836
FF-N-836 TY1ST1 124589 15491X A nut, flat on top and bottom, having 4 flat sides.
FF-N-836 NUT,PLAIN,SQUARE 35 EA NS Request Quotation FFN836.
FF-N-836 TY1ST3SZ10 4B2047 110634 01014901 MIL-B-933 A nut, flat on top and bottom, having 4 flat
FF-N-836 NUT,PLAIN,SQUARE 11 HD NS Request Quotation Subscribe to View Vendor Details...
FF-N-836 TY2ST13CL2B A nut, flat on top and bottom having 6 flat sides.
FF-N-836 TY2ST13CL2B PD77 1143F8 N16311L 114378 84850 DX418K A nut, flat on top and bottom having FF-N
Restrictions 5310-00-923-1924
5310-00-923-1924 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-923-1924
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-923-1924
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZCL
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Supplementary Collaborators:
- HD
Approved Sources 5310-00-923-1924
- Part Number
- Manufacturer
- Status
- MS45905S5
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- FF-N-836
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- MS45905-S5
- 28548 - Fabrication Specialty Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 99891A120
- 0KVE5 - Phillips And Brooks/Gladin Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS45905-S5
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-923-1924
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Bearing Surface Type [CRTM]
- Chamfered
- Hardness Rating [CQFM]
- 95.0 Rockwell B Minimum And 32.0 Rockwell C Maximum
- Material [MATT]
- Steel Overall
- Nominal Thread Size [CQJX]
- 0.375 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 4 Style And B Grade
- Nut Height [ADEA]
- 0.320 Inches Minimum And 0.337 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Width Across Flats [ASDB]
- 0.551 Inches Minimum And 0.563 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Left-Hand
- Thread Series [BZRR]
- Unc
- Thread Quantity Per Inch [CMLP]
- 16
Weapon Systems (WSDC) 5310-00-923-1924
DLA Procurement Analysis 5310-00-923-1924
- Last Stock Position:
- 204 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-923-1924
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-923-1924
Freight Information 5310-00-923-1924
5310-00-923-1924 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-923-1924 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-923-1924 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-923-1924 is not classified as a special type of cargo when transported by water. 5310-00-923-1924 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-923-1924
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-923-1924 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: