Premium Information is available for this item - Upgrade for $1 a day
5310-00-918-4861
Flat Washer
5310009184861 009184861 CPP117-8 H5353
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
6
Marketplace 5310-00-918-4861
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-918-4861 5+ Documents (More...)
CPP117-8 WASHER,FLAT 475 EA NS Request Quotation FedMall Updated Every 15 Minutes 5310-00-918-4861 BUY
//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-918-4861 Flat Washer 5310009184861009184861,CPP117-8
865-7342 6510218657342218657342 Surgical Adhesive Tape 6510218452218,H5353 https//www.nsnlookup.com /
fsg on one side with a pressure-sensitive adhesive Adhesive Tape 6510218452218,H5353 6 6 Jun 1968 6510
,H5353 6 6 Jun 1968 6510-21-865-7342 H5353 fabric and/ 6510218452218 https//www.nsnlookup.com /fsg-65
Flat Washer 5310009184861 009184861,CPP117-8 6510-21 -865-7342 H5353 Surgical Adhesive Tape 6510218452218
Flat Washer 5310009184861 009184861,CPP117-8 6510-21 -865-7342 H5353 fabric and/ 6510218452218
https//www.nsnlookup.com /fsg-65/fsc-6510/ca 6510-21-845-2218 Surgical Adhesive Tape 6510218452218,H5353
H5353 DL9A A manual or power driven boring tool with a double twist solid center or a single twist hollow
NumberManufacturerStatusBS2054 K7766 - Bsi Standards Limited (Active) Incomplete Standard RNCC 4 RNVC 1 DAC 4 DL9A-H5353
Restrictions 5310-00-918-4861
5310-00-918-4861 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-918-4861
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-918-4861
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-00-918-4861
- Part Number
- Manufacturer
- Status
- CPP117-8
- Manufacturer
- 09017 - Edo (Obsolete)
- Original Design
- Original Design
- H5353
- 09017 - Edo (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-918-4861
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 110.0 Rockwell R Nominal
- Hole Diameter [AAUB]
- 0.125 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-M-20693 Ty 1 Mil Spec Single Material Response Overall
- Material [MATT]
- Plastic Polyamide Overall
- Minimum Tensile Strength [CQBC]
- 7000 Pounds Per Square Inch
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Overall Diameter [ADAV]
- 0.250 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.046 Inches Nominal
DLA Procurement Analysis 5310-00-918-4861
Management Data 5310-00-918-4861
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-918-4861
Freight Information 5310-00-918-4861
5310-00-918-4861 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-918-4861 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-918-4861 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-918-4861 is not classified as a special type of cargo when transported by water. 5310-00-918-4861 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-918-4861 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: