Premium Information is available for this item - Upgrade for $1 a day
5310-00-887-9415
Sleeve Nut
5310008879415 008879415 680157
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
14
Marketplace 5310-00-887-9415
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-887-9415 3+ Documents (More...)
( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-887-9415 Sleeve Nut 5310008879415 008879415,680157
Sleeve Nut 5310008879415 008879415,680157 Primary Buy RNCC 3 RNVC 2 DAC 2 PT5562-2-680157 https https
58/fsc-5805/uk 5805-99-649-6549 Electrical-El Panel 5805996496549996496549 25YLJ00-406N00PT5562-2-680157
Sleeve Nut 5310008879415 008879415,680157 Primary Buy RNCC 3 RNVC 2 DAC 2 PT5562-2-680157 https
Sleeve Nut 5310008879415 008879415,680157 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-
887-9415 Sleeve Nut 5310008879415 008879415,680157 Primary Buy RNCC 3 RNVC 2 DAC 2 PT5562-2-680157 https
Restrictions 5310-00-887-9415
5310-00-887-9415 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-887-9415
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-887-9415
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 May 2013
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Jan 2002
- Germany (ZG01)
- Effective Date:
- 1 Feb 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
Approved Sources 5310-00-887-9415
- Part Number
- Manufacturer
- Status
- 680157
- Manufacturer
- 70210 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- 680157
- 72599 - Alliedsignal Inc Dba Allied-Signal (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-887-9415
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Hexagonal Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Thickness [ABKU]
- 0.130 Inches Minimum And 0.150 Inches Maximum
- Flange Width Across Flats [AFGG]
- 0.375 Inches Nominal
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum And 38.0 Rockwell C Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 4130 Overall
- Nominal Thread Size [CQJX]
- 0.138 Inches
- Nut Diameter [ACTD]
- 0.280 Inches Minimum And 0.300 Inches Maximum
- Nut Length [ACVN]
- 0.230 Inches Minimum And 0.270 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Series [BZRR]
- Unf
Weapon Systems (WSDC) 5310-00-887-9415
DLA Procurement Analysis 5310-00-887-9415
- Last Stock Position:
- 17 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-887-9415
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-887-9415
Freight Information 5310-00-887-9415
5310-00-887-9415 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 107340. A Sub NMFC of X. It has a NMFC Description of TURNBUCKLES/SLEEVE NUTS NOI I/S. 5310-00-887-9415 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55190 which rates the freight between FCL and LCL. 5310-00-887-9415 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-887-9415 is not classified as a special type of cargo when transported by water. 5310-00-887-9415 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-887-9415
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-887-9415 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: