Premium Information is available for this item - Upgrade for $1 a day
5310-00-873-7016
Flat Washer
5310008737016 008737016 8437178 78010
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
23
Marketplace 5310-00-873-7016
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-873-7016 5+ Documents (More...)
(Identification) 1/3 NSN 5310-00-873-7016 (Identification) 2/3 NSN 5310-00-873-7016 (Identification
) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-873-7016 Flat Washer 5310008737016 008737016,8437178
Restrictions 5310-00-286-2920 DEMIL: A | DEMILI https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-873-7016
Flat Washer 5310008737016 008737016,8437178 Documents 5310-00-873-7016 5+ Documents ( More... )
BOOTPROM 78010 MANUFACTURER GIVES NO ID-DATA A microcircuit specifically designed to generate, modify
Faisceau Dallumeur 2920142430729142430729 -35 32-78010-309 A grouping of two or more different https
-DN20-25MM TUBAN0DN20-78010 An item of varying tubular shapes molded or extruded from nonmetallic material
-DN20-25MMTUBAN0DN20-78010 An item of varying tubular shapes molded or extruded from RQST NE Updated
-3532-78010-309 A grouping of two or more different types of electrical/electronic components -35 32-
78010-309 A Electronic Components Assembly 5998008301277 -35 32-78010-309 A grouping of two or Electronic
Restrictions 5310-00-873-7016
5310-00-873-7016 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-873-7016
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-873-7016
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2017
- Supplementary Collaborators:
- HD
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Morocco (YP01)
- Effective Date:
- 1 Sep 2010
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-873-7016
- Part Number
- Manufacturer
- Status
- 8437178
- Manufacturer
- 19204 - Army, United States Department Of (Active)
- Primary Buy
- Primary Buy
- 78010
- 73030 - Hamilton Sundstrand Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5310008737016
- A00AM - E.C.A Etablissement Central Des (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-00-873-7016
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 58.0 Rockwell C Minimum And 62.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 1.000 Inches Minimum And 1.005 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-8559 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 1095 Overall
- Overall Diameter [ADAV]
- 1.495 Inches Minimum And 1.505 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 32.0 Microinches Bottom
- Surface Finish [CSYM]
- 32.0 Microinches Top
- Thickness [ABNM]
- 0.095 Inches Minimum And 0.100 Inches Maximum
DLA Procurement Analysis 5310-00-873-7016
Management Data 5310-00-873-7016
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-873-7016
Freight Information 5310-00-873-7016
5310-00-873-7016 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-873-7016 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-873-7016 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-873-7016 is not classified as a special type of cargo when transported by water. 5310-00-873-7016 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-873-7016
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-873-7016 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: