Premium Information is available for this item - Upgrade for $1 a day
5310-00-871-8367
Flat Washer
5310008718367 008718367 6863332-3 EU20637 251151 FF-W-92B 634419
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
14



Marketplace 5310-00-871-8367
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-871-8367 5+ Documents (More...)
Day 5310-00-871-8367 RQST Updated Every Day 5310-00-871-8367 RQST NE Related Documents 5310-00-871-8367
5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-871-8367 Flat Washer 5310008718367
FF-W-92B WASHER,FLAT RQST NS Request Quotation Updated Every Day 5310-00-110-5640 RQST NE Updated Every
/fsg-53/fsc-5310/us 5310-00-871-8367 Flat Washer 5310008718367 008718367,6863332-3 Flat Washer 5310001105640001105640
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-00-074-2186 Flat Washer 5310000742186 000742186,FF-W-92B FF-W-92B WASHER,FLAT
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-00-254-7258 Flat Washer 5310002547258 002547258,FF-W-92B FF-W-92B WASHER,FLAT
Restrictions 5310-00-871-8367
5310-00-871-8367 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-871-8367
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-871-8367
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-871-8367
- Part Number
- Manufacturer
- Status
- 6863332-3
- Manufacturer
- 73342 - Allison Transmission Inc (Active)
- Primary Buy
- Primary Buy
- EU20637
- K0680 - Rolls-Royce Airlines (Active)
- Secondary Buy
- Secondary Buy
- 6863332-3
- K0680 - Rolls-Royce Airlines (Active)
- Secondary Buy
- Secondary Buy
- 251151
- 34830 - Rogerson Kratos (Active)
- Transferred
- Transferred
- FF-W-92B
- 81348 - Federal Specifications Promulgated (Active)
- Transferred
- Transferred
- 634419
- S0554 - Tokyo Judogi Kogyo Co. (Replaced)
- Transferred
- Transferred
- 251151
- S0554 - Tokyo Judogi Kogyo Co. (Replaced)
- Transferred
- Transferred
- 251151
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Transferred
- Transferred
- 634419
- 77445 - Rtx Corporation (Active)
- Transferred
- Transferred
- 251151
- 77445 - Rtx Corporation (Active)
- Transferred
- Transferred
Datasheet 5310-00-871-8367
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 30.0 Rockwell C Minimum And 34.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.197 Inches Minimum And 0.210 Inches Maximum
- Material [MATT]
- Steel Comp 420 Overall
- Heat Treatment [HEAT]
- As Fabricated
- Material Document And Classification [MDCL]
- Ams 5621 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 0.440 Inches Minimum And 0.453 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 63.0 Microinches All Surfaces
- Thickness [ABNM]
- 0.100 Inches Nominal
DLA Procurement Analysis 5310-00-871-8367
Management Data 5310-00-871-8367
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-871-8367
Freight Information 5310-00-871-8367
5310-00-871-8367 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-871-8367 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-871-8367 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-871-8367 is not classified as a special type of cargo when transported by water. 5310-00-871-8367 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-871-8367
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-871-8367 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: