5310-00-847-5552

(CAGE Code 55284) | DAC: 5 1 Jan 1960 5310-00-847-5552 Flat Washer 172625RNCC: 3 | RNVC: 2 | DAC: 5 1

5305-99-421-2378 5305994212378 994212378 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.

5340-99-916-9972 5340999169972 999169972 is a narrow strip of webbing cut to a definite length, having one or both ends processed. it is usually designed for, and may have, one or more attachments or fasteners, such as buckle; loop, strap fastener; strap end clip; ring, dee; hook; and the like. excludes strap, berth, mattress retaining; strap, chin; safety straps; and webbing, textile. do not use if a more specific item name applies.

5 1 Jan 1962 5315-00-904-8359 Headed Straight Pin 86084RNCC: 3 | RNVC: 2 | DAC: 5 1 Jan 1960 5310-00-847-5552

5305-99-173-0861 5305991730861 991730861 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.