Premium Information is available for this item - Upgrade for $1 a day
5310-00-844-0515
Flat Washer
5310008440515 008440515 C312000148 2615063
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
14
Marketplace 5310-00-844-0515
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-844-0515 5+ Documents (More...)
Restrictions 5310-00-844-0515
5310-00-844-0515 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-00-844-0515
- Israel (YD01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-844-0515
- Part Number
- Manufacturer
- Status
- 2615063
- Manufacturer
- 56232 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- 2615063
- 06424 - Alliant Techsystems Operations Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- C312000148
- 88818 - Kearfott Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-844-0515
- Characteristic
- Specifications
- Center Hole Shape Style [ABMX]
- Specifications
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.343 Inches Nominal
- Material [MATT]
- Copper Alloy 842 Overall
- Material Document And Classification [MDCL]
- Astm B139,Hard,Finish 31 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 0.875 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 63.0 Microinches Bottom
- Surface Finish [CSYM]
- 63.0 Microinches Top
- Surface Treatment Document And Classification [STDC]
- Mil-T-10727 Type 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Tin Overall
- Thickness [ABNM]
- 0.029 Inches Minimum And 0.031 Inches Maximum
NATO Stock Numbers Related to 5310-00-844-0515
Freight Information 5310-00-844-0515
5310-00-844-0515 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-844-0515 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-844-0515 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-844-0515 is not classified as a special type of cargo when transported by water. 5310-00-844-0515 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-844-0515
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box