Premium Information is available for this item - Upgrade for $1 a day
5310-00-823-8763
Shouldered And Recessed Washer
5310008238763 008238763 SM-B-414658 800912
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers. View more Shouldered And Recessed Washer
May 2023
18
Marketplace 5310-00-823-8763
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-823-8763 5+ Documents (More...)
Updated Every Day 5310-00-823-8763 RQST Updated Every Day 5310-00-823-8763 RQST NE Related Documents
5310-00-823-8763 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-823-8763
Shouldered And Recessed Washer 5310008238763 Replaced) Primary Buy RNCC 3 RNVC 2 DAC 5 599-800912
Upgrade your Account Upgrade 5330-00-687-4834Preformed Mechanical Felt5330006874834 006874834 407-800912
Metallic Tube 4710016150063 016150063,800912 8763Shouldered And Recessed Washer5310008238763 008238763
Shouldered And Recessed Washer 5310008238763 Account Upgrade 5310-00-823-8763Shouldered And Recessed
www.nsnlookup.com /fsg-58/fsc-5855/no 5855-25-131-3523 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-823-8763
Shouldered And Recessed Washer 5310008238763 Documents 5310-00-823-8763 4+ Documents ( More...
Shouldered And Recessed Washer 5310008238763 Upgrade your Account Upgrade 5310-00-823-8763Shouldered
And Recessed Washer5310008238763 008238763 SM-B-414658 Documents 5310-00-823-8763 4+ Documents ( More
Restrictions 5310-00-823-8763
5310-00-823-8763 is a Shouldered And Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-823-8763
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-823-8763
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
Approved Sources 5310-00-823-8763
- Part Number
- Manufacturer
- Status
- SM-B-414658
- Manufacturer
- 80063 - Us Army Communications & Electronics (Active)
- Primary Buy
- Primary Buy
- 800912
- 80045 - L3harris Cincinnati Electronics (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-00-823-8763
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Hole Diameter [AAUB]
- 0.190 Inches Minimum And 0.195 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-698 Fed Spec All Material Responses Overall
- Material Thickness [ABPX]
- 0.045 Inches Minimum And 0.055 Inches Maximum
- Material [MATT]
- Steel Comp 1008 Overall Or Steel Comp 1009 Overall Or Steel Comp 1015 Overall Or Steel Comp 1018 Overall Or Steel Comp 1020 Overall
- Outside Diameter [ABKV]
- 0.547 Inches Minimum And 0.578 Inches Maximum
- Recess Angle [CSTM]
- 89.5 Degrees Minimum And 90.5 Degrees Maximum
- Shoulder Height [ABMG]
- 0.045 Inches Minimum And 0.055 Inches Maximum
- Shoulder Diameter [AAVH]
- 0.369 Inches Minimum And 0.379 Inches Maximum
- Style Designator [STYL]
- Shouldered And Recessed
- Surface Treatment Document And Classification [STDC]
- Mil-F-14072,Finish -262 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
DLA Procurement Analysis 5310-00-823-8763
Management Data 5310-00-823-8763
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-823-8763
Freight Information 5310-00-823-8763
5310-00-823-8763 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-823-8763 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-823-8763 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-823-8763 is not classified as a special type of cargo when transported by water. 5310-00-823-8763 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-823-8763
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-823-8763 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: