Premium Information is available for this item - Upgrade for $1 a day
5310-00-822-1537
Plate Nut Spacer
5310008221537 008221537 NAS1195D3WM
An item having two flat bearing surfaces, conforming to the same shape as the base of a NUT (1), PLAIN, PLATE and NUT (1), SELF-LOCKING, PLATE. It is used to provide better alignment in assembly. View more Plate Nut Spacer
May 2023
13
Marketplace 5310-00-822-1537
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-822-1537 1+ Documents (More...)
Restrictions 5310-00-822-1537
5310-00-822-1537 is a Plate Nut Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-00-822-1537
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Mar 1995
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-822-1537
- Part Number
- Manufacturer
- Status
- NAS1195D3WM
- Manufacturer
- 30889 - Eriks Southwest Inc (Active)
- Primary Buy
- Primary Buy
- NAS1195D3WM
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1195D3WM
- 07851 - Nor-Cal Supply Co.Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1195D3WM
- 53606 - Plastic And Metal Products (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-00-822-1537
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Center To Center Distance Between Mounting Holes Along Length [ADFY]
- 0.498 Inches Minimum And 0.502 Inches Maximum
- Distance From Aperture Center To Mounting Hole Center [ADFW]
- 0.247 Inches Minimum And 0.253 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-318 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 5052 Overall
- Mounting Hole Arrangement Style [ADFU]
- 2 Holes
- Mounting Hole Diameter [ABTB]
- 0.102 Inches Minimum And 0.108 Inches Maximum
- Nut Length [ACVN]
- 0.724 Inches Maximum
- Nut Mounting Provision [ADFP]
- Straight Holes
- Nut Style [ACTA]
- Plate Nut Spacer
- Plate Width [ADEC]
- 0.328 Inches Maximum
- Plate Thickness [ADEB]
- 0.032 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thru-Hole Diameter [ADAZ]
- 0.210 Inches Minimum And 0.220 Inches Maximum
DLA Procurement Analysis 5310-00-822-1537
Management Data 5310-00-822-1537
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-00-822-1537
Freight Information 5310-00-822-1537
5310-00-822-1537 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-00-822-1537 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-00-822-1537 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-822-1537 is not classified as a special type of cargo when transported by water. 5310-00-822-1537 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-822-1537 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: