Premium Information is available for this item - Upgrade for $1 a day
5310-00-810-0524
Flat Washer
5310008100524 008100524 0L516 28328 46096240
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
14
Marketplace 5310-00-810-0524
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-810-0524 5+ Documents (More...)
WASHER,FLAT 60 EA NS Request Quotation 28328 WASHER,FLAT 60 EA NS Request Quotation 46096240 WASHER,
/fsc-5310/us 5310-00-810-0524 Flat Washer 5310008100524 008100524,0L516 0L5162832846096240 A washer having
WASHER,FLAT 60 EA NS Request Quotation 28328 WASHER,FLAT 60 EA NS Request Quotation Updated Every Day
Flat Washer 5310008100524 008100524,0L516 Agency (DS)IAConsolidated With 5310-00-810-0524 https
Washer5310008100524 008100524 0L516 28328 46096240 Identification WASHER,FLAT 60 EA NS Request Quotation
28328 WASHER,FLAT 60 EA NS Request Quotation 46096240 5330/us 5330-00-363-5975 Flat Washer 5330003635975
https//www.nsnlookup.com /fsg-59/fsc-5950/it 5950-15-006-5397 Transformer 5950150065397 150065397,4-28328
https//www.nsnlookup.com /fsg-59/fsc-5950/it 5950-15-006-5397 Transformer 5950150065397 150065397,4-28328
WASHER,FLAT 60 EA NS Request Quotation 28328 WASHER,FLAT 60 EA NS Request Quotation 0L516 WASHER,FLAT
Every Day 5330-01-034-6968 RQST Updated Every Day https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-810-0524
Restrictions 5310-00-810-0524
5310-00-810-0524 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-810-0524
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-810-0524
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5310-00-810-0524
- Part Number
- Manufacturer
- Status
- 46096240
- Manufacturer
- 80234 - Vapor Corp (Obsolete)
- Original Design
- Original Design
- 0L516
- 61178 - Tuthill Corporation (Active)
- Secondary Buy
- Secondary Buy
- 28328
- 72386 - Felters Co The (Active)
- Secondary Buy
- Secondary Buy
- 28328
- 03931 - Felters Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-810-0524
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Wool Comp 12R3x Overall
- Material Document And Classification [MDCL]
- C-F-206,Type 1,Cl 12R3 Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.438 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.688 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.094 Inches Nominal
- Minimum Tensile Strength [CQBC]
- 200 Pounds Per Square Inch
DLA Procurement Analysis 5310-00-810-0524
Management Data 5310-00-810-0524
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5310-00-810-0524
Freight Information 5310-00-810-0524
5310-00-810-0524 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194020. A Sub NMFC of X. It has a NMFC Description of WASHERS/GASKETS/PCKG DVC ETC FELT. 5310-00-810-0524 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95050 which rates the freight between FCL and LCL. 5310-00-810-0524 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-810-0524 is not classified as a special type of cargo when transported by water. 5310-00-810-0524 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-810-0524
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-810-0524 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: