Premium Information is available for this item - Upgrade for $1 a day
5310-00-702-1797
Flat Washer
5310007021797 007021797 WPL22-6 805790 BACW10AKWP6 WP6
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
27
Marketplace 5310-00-702-1797
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-702-1797 5+ Documents (More...)
BACW10AKWP6 WASHER,FLAT 100 EA NS Request Quotation Subscribe to View Vendor Details... 805790 WASHER
WPL22-6 WASHER,FLAT 95 EA NS Request Quotation Updated Every Day 5310-00-702-1797 RQST NE Updated Every
WASHER,FLAT 2 EA NS Request Quotation Updated Every Day 805790 RQST NE Updated Every Day 583K963 RQST
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-702-1797 Flat Washer 5310007021797 007021797,WPL22
States (US) 4. 5310-00-159-6315 Marketplace Restrictions Approved Sources Datasheet Management BACW10AKWP6
Flat Washer 5310007021797 007021797,WPL22-6 Documents 5310-00-702-1797 5+ Documents ( More... )
www.nsnlookup.com /fsg-59/fsc-5961/us 5961-00-946-1953 Transistor 5961009461953009461953 RELEASE458413-805790
day Upgrade your Account Upgrade 5961-00-946-1953Transistor5961009461953 009461953RELEASE4584 13-805790
660937718 ,WP6 enable ,WP6 ,WP6 313 WP6 enable WP6 313 WP6 Tube /fsg-83/fsc-8305/au 8305-66-093-7718
313 enable JavaScript ,WP6 313 313 WP6 enable JavaScript ,WP6 313 https//www.nsnlookup.com /fsg-59/fsc
Restrictions 5310-00-702-1797
5310-00-702-1797 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-702-1797
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-702-1797
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZCLBFBD
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEHD
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-702-1797
- Part Number
- Manufacturer
- Status
- BACW10AKWP6
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- WP6
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- BACW10AKWP6
- 08903 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACW10AKWP6
- 08073 - Mamco Mfg Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- WPL22-6
- 56878 - Sps Technologies, Llc (Active)
- Advisory Reference
- Advisory Reference
- 805790
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-702-1797
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 39.0 Rockwell C Minimum And 43.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.370 Inches Minimum And 0.380 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec 1St Material Response Overall Or Mil-S-18729 Mil Spec 1St Material Response Overall Or Mil-S-5626 Mil Spec 2Nd Material Response Overall Or Ams 6358 Assn Std 3Rd Material Response Overall
- Material [MATT]
- Steel Comp 4130 Overall Or Steel Comp 4140 Overall Or Steel Comp 8740 Overall
- Overall Diameter [ADAV]
- 0.677 Inches Minimum And 0.697 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Specification/Standard Data [ZZZK]
- 81205-Bacw10ak Manufacturers Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 1,Cl 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thickness [ABNM]
- 0.069 Inches Nominal
Weapon Systems (WSDC) 5310-00-702-1797
DLA Procurement Analysis 5310-00-702-1797
- Last Stock Position:
- 884 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-702-1797
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-702-1797
Freight Information 5310-00-702-1797
5310-00-702-1797 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-702-1797 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-702-1797 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-702-1797 is not classified as a special type of cargo when transported by water. 5310-00-702-1797 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-702-1797
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-702-1797 1 Records
Contracting Technical Data File (CTDF) 5310-00-702-1797 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: